From: dave_dowding@agilent.com
Sent: Tuesday, April 08, 2003 10:07 AM
To: stds-1450-4@majordomo.ieee.org
Subject: stds-1450.4: P1450.4 Flow Working Group Meeting Minutes for 08April2003 Conference Call:

Attendees: Jim O'Reilly, Ernie Wahl, Don Organ (briefly), Dave Dowding, Jim Mosley

1. Dave's impression from doing work on the Use Case #4:

The conceptual model (per ITC2002 diagrams) was very enabling.

2. Jim suggested that the diagrams from the ITC2002 meeting be included into the

Working Draft Document. Perhaps if wording has changed, then update that information

as well. Ernie fed back that some of this model are still under discussion between he

and Don. Ernie reminded us that he has updated some of the syntax out of discussions

with Don. Dave seconds this proposition to formalize/update the working draft by the

end of the month (April 2003). If this time frame is difficult, Dave is willing to act on this

for Don.

3. Jim suggested getting some other "real world" test program examples. One possibility

is from an Agilent semiconductor group. Any other examples representing other ATE

platforms perhaps from Larry Moran and others? Even if we just look at the program

flows and smaller sections would be helpful.

4. Jim O'Reilly will look into the program examples from Agilent (93000 centric).

5. Ernie and Jim O. will get together to update the original ITC2002 diagrams. They

will try to get together by Monday, next.

6. Dave will build the example portion of Use Case 4. Ernie will send an update of the

ascii file (syntax update) to the group and Dave will use it.

7. Jim suggests that have more interaction between phone calls, and Dave committed

to do a better job of getting the Agenda for each call out at least a day before the call.

Call ended at 11:08 am MDT.