RE: Presentation for T10 (next week)
This looks to be just the right level to enable the T10 folks to think about
how SCSI would integrate with P1619. Leaving them with the questions on your
last slide will motivate them to actually do the thinking.
One addition you might consider is a system diagram slide to explain
expected or typical implementations: A host or two, a storage system with
multiple scopes, whatever you think would help the T10 folks get an overview
of where P1619 fits into a set of hosts and storage devices. It could show
where the transforms may be executed, when/where the key backup may be
necessary.
A question you might want to add: What about tape?
You may get questions about how this relates to FC-SP. You probably don't
need a slide for this because the system diagram slide would provide the
right places to point at, even if it didn't mention FC-SP.
Thanks for doing this!
- Bob
-----Original Message-----
From: Fabio Maino [mailto:fmaino@cisco.com]
Sent: Thursday, April 29, 2004 11:32 PM
To: stds-p1619@IEEE.ORG
Cc: Nixon, Bob
Subject: Presentation for T10 (next week)
Enclosed is the draft of the presentation for the T10 CAP working group
(next tuesday 5/4 in Monterey).
Please review the document and let me know your comments and suggested
changes.
Thanks,
Fabio