*IEEE P1619.2 E-MOTION 2008-01: Approve P1619.2/D7 to advance to IEEE
Sponsor Ballot. *
Votes MUST be sent by email to the group secretary: Fabio Maino [
fmaino at cisco.com
<mailto:fmaino@xxxxxxxxx?subject=P1619%20BALLOT&cc=stds-p1619@xxxxxxxx>].
Also, please CC the mailing list stds-p1619 at IEEE.ORG
<mailto:stds-p1619@xxxxxxxx> as well.
Please format your e-mail vote as follows:
<COMPANY NAME>
<Name of voting WG member>
<Vote: Yes/No/Abstain>
<COMMENTS>
To simplify processing, the subject of the mail should be "P1619.2
BALLOT". Comments may be received in any format, such as adobe
comment file (.fdf) or as comments in an excel spreadsheet
(attached). Adobe comment file is the preferred format.
*/E-MOTION 2008-01: Approve P1619.2/D7 /**to advance to IEEE
Sponsor **/Ballot/*
The IEEE Security in Storage Working Group authorizes the IEEE
P1619.2 editor to submit draft D7 with approved changes for sponsor
ballot. This motion allows for editorial changes and minor
corrections to be made to the draft before ballot without a re-vote
in the working group. If after approval of this motion, major changes
to P1619.2 are deemed necessary by the working group, this vote shall
be voided and a new vote shall be required for the working group to
submit the draft standard to sponsor ballot.
*/Timeline:/*
E-Voting opens: August 7th, 2008, 5 pm PDT
E-Voting closes: September 6th, 2008, 5 pm PDT
*/Eligible E-voters:/*
Brocade
Cisco
Dell
Emulex
Hitachi Data Systems
Hitachi GST
Hifn
HP
IBM
Lexar Media
LSI Logic
Microsoft
nCipher
NetApp
Optica
PGP Corporation
PMC Sierra
Quantum Corp.
RSA Security/EMC
SafeNet
Seagate
SrongAuth
Sun Microsystems
Symantec
Voltage Security
Vormetric
Wave Systems
WinMagic
The voting is "per company", as it has been always the case in the
P1619.2 workgroup.
*/Tabulation of votes:/*
For the motion to pass, we must have:
- at least 14 votes (a quorum of members of the group)
- more than 1/2 of all votes cast must be YES.
The following paragraph is a quote from the "Operating Procedures for
P1619" document:
When conducting a Working Group ballot on a draft document, each voting
Working Group member shall vote one of the following positions:
1. Affirmative (with or without comments)
2. Do Not Approve
(Negative With Comments - the reasons for a negative vote shall
be given and shall include specific wording or actions that, if
implemented, would resolve the objection)
3. Abstain
Please use adobe comment files (.fdf, preferred format) or the
attached spreadsheet when preparing comments.
P1619.2/D7 is available at:
https://siswg.net/index.php?option=com_docman&task=doc_download&gid=134&Itemid=41
--
Thanks!
Fabio Maino
Cisco Systems
425 East Tasman Drive
San Jose, CA 95134
Work: 4088537530