IEEE HomeSearch IEEE ShopWeb Account Contact IEEE IEEE
MembershipPublicationsServicesStandardsConferencesCareers/Jobs
IEEE-SA IEEE-SA Member Area Search our standards database for Abstract, Sponsor, Status, Contact,Ordering and Historical information. IEEE-SA Standards Association
   Text Size: Small Text Normal Text Larger Text

IEEE P1901

Approved PARGo to this link.

Scope and PurposeGo to this link.

Members Only Go to this link.
(password required)

Mentor Go to this link.
(password required)

Meeting Information Go to this link.

Calendar Go to this link.

Approved Workflow Go to this link.

Standards Association Corporate Membership information Go to this link.

Policies and Procedures Go to this link.

P1901 Participating Entities Go to this link.

To join the working group, contact the IEEE P1901 Project Manager Go to this link.

Stds-bpl-mac Email List Archive Go to this link.

 

IEEE P1901 Draft Standard for Broadband over Power Line Networks: Medium Access Control and Physical Layer Specifications

Report on Sponsor Ballot of P1901, Draft 3.0

The initial 30-day sponsor ballot on Draft 3.0 yielded 98% returned ballots of the 56 voting entities and 81% affirmative votes.

857 comments were received. Comment resolution started during the P1901 Working Group meeting held 12-16 April 2010 in Osaka, Japan.

Approval of P1901 as an IEEE standard is targeted for September 2010.

Draft 3.0 is available for sale through the IEEE store.

*****

The next P1901 WG meeting is scheduled for 12-16 April 2010 in Osaka, Japan (see next meetings).

Jean-Philippe Faure
IEEE P1901 Chair

Reports on previous meetings:

Santa Monica, CA, USA, 8-12 February 2010
Press release--Santa Monica, CA, USA, 8-12 February 2010

Tel Aviv, Israel, 8-10 December 2010
Press release--Tel Aviv, Israel, 8-10 December 2010

Boston, MA, USA, 13-16 October 2009
Press release--Boston, MA, USA, 13-16 October 2009

Tokyo, Japan, 21-24 July 2009
Press release--Tokyo, Japan, 21-24 July 2009

Las Vegas, NV, USA, 18-22 May 2009
Press release--Las Vegas, NV--18 June 2009

Miami, FL, USA 3-6 Feb 2009 and Dresden, Germany, 24-27 March 2009

Kyoto, Japan, 16-19 December 2008
Press release--Kyoto, Japan--7 January 2009

San Francisco, CA, USA, 4-6 November 2008

Madrid, Spain, 29 September-2 October 2008

Miami, FL, USA, 8-10 July 2008

Fukuoka, Japan, 5-6 March 2008

San Diego, CA, USA, 11 December 2007

Boston, MA, USA, 15-18 October 2007


IEEE P1901 milestones

June 2005 - PAR approved
November 2005 - Adoption of the general work flow - Formation of a sub-group to develop unified requirements
January 2006 - Approval of the use cases - Decision to split the requirements into three clusters: In-Home, Access and Coexistence/Interoperability
March 2006 - Approval of the down selection process to achieve the baseline of the standard - Approval of the description of topologies.
September 2006 - Approval of the channel and noise models.
February 2007 - Approval of 400 requirements split into three clusters: access, in-home and coexistence - Calls for technical proposals
June 2007 - 12 proposals received; 4 proposals per cluster of requirements
July 2007 - 11 proposals passed the low hurdle vote; 4 in-home proposals, 4 access proposals and 3 coexistence proposals
September 2007 - Only two proposals per cluster remain for consideration after voluntary mergers.
October 2007 - One in-home proposal and one access proposal remain as candidates for confirmation after the first round of elimination voting.
March 2008 - A single coexistence proposal remains as candidate for confirmation after the last round of elimination voting.
July 2008 - The first round of confirmation voting for the in-home, access, and coexistence proposals is held. All three votes fail.
September 2008 - The second round of confirmation voting for the in-home, access, and coexistence proposals is held. The votes on the in-home and access proposals fail. The vote on the coexistence proposal is ruled invalid because the number of abstain votes exceeds the established percentage. A reset vote is held for in-home and access yielding a single proposal for confirmation in the in-home cluster, and two proposals for the access cluster. A voluntary merger in the access cluster is announced at the end of the meeting, bringing the total for access to a single proposal.
November 2008 - The first round of confirmation voting for the in-home and access proposals is held. Both votes fail.
December 2008 - The second round of confirmation voting for the in-home, access, and coexistence clusters is held. All three proposals are confirmed.
February 2009 - A tentative table of contents of the Draft Standard is adopted and four Technical Subgroups are formed to merge the confirmed proposals and develop a unified document.
July 2009 - The first Draft Standard is created. The Draft is sent for comment and vote on whether it is ready to go to Sponsor Ballot.
October 2009 - Development of the ITU-T G.hn Compatible PHY/MAC Draft option is stopped. Related chapters and annexes are removed from the Draft.
December 2009: Comment resolution on Draft 1.0 completed.
January 2010: Draft 2.0 is circulated for comment and vote on whether it is ready to go to Sponsor Ballot.
February 2010: Draft 2.0 receives 100% approval from the WG, affirming that it is mature enough to go to Sponsor Ballot. The comments received on Draft 2.0 are addressed, and Draft 3.0 is generated. The WG decides to move Draft 3.0 to Sponsor Ballot.
April 2010: Initial 30-day sponsor ballot on Draft 3.0 receives 81% affirmative votes.

 


About IEEE P1901

The working group, formed in June 2005, has grown from 20 to more than 50 members. Members are corporations, government agencies, trade associations, universities, and standards developing organizations. Each entity has one vote.

About The IEEE-SA Corporate Standards Program

The IEEE-SA Corporate Standards Program allows entities to create standards within an ANSI-accredited, open process. Standards are developed in company-based working groups in which each member has one vote. This industry-oriented program allows for standards creation in as little as one to two years, depending on participant commitment and funding for IEEE services that can optimize all phases of the standards development process.

 
spacer
Copyright ©2010 IEEE-SA
(mailto: P1901 Project Manager)
URL: http://grouper.ieee.org/groups/1901/
spacer