Re: [10GBASE-T] The channel model
Thanks for the input. I'm planning to schedule a
con-call next week to
discuss the channel modeling.
What are the requirements that necessitate
channel characterization up to 1 GHz?
I'd like to limit the channel
characterization to account for relevant signal spectrum and
minimize excess bandwidth
----- Original Message -----
Sent: Tuesday, January 14, 2003 10:36
Subject: [10GBASE-T] The channel model
> I would like
to propose the following steps in order to validate/generate a
channel model for 50m & 100m of CAT6/6e & CAT5e with two
> 1) Channel characterization for
Attenuation, phase and roughness up to 1GHz.
> 2) Cable balance
vs frequency up to 1GHz.
> 3) Channel characterization for
NEXT,ANEXT,FEXT up to 1GHz.
> 4) Validate RLCG model based on
> Plato Labs,Inc
> V.P Mixed Signal