[10GBASE-T] matlab ad hoc
To get this kicked off, I suggest developing some code to compute the optimal DFE SNR. I would like to see several participants independently develop some code. For the purposes of testing the code only, we need to agree upon a transmit PSD, transformer, channel and noise models. I do not want to use DSL models. I suggest something from TIA 568b or ISO 11801. I am open to specific proposals. For the transformer, I suggest a simple first order high pass filter with low frequency 3dB point in the range of 10 to 15 MHz. For the simulation results I have present, I used 12.5 MHz. For initial testing purposes, I suggest a PAM10 PSD with 10dBm power.
I am sending this to the reflector. But, since several people are having problems getting to the reflector, I am thinking to carry on the ad hoc via direct distribution to interested participants. Let me know if this creates a problem for anyone. So, I will be sending a separate email directly to those participants that have contacted me either by email or business card by the end of business today (1/16/03). If you do not receive a second email and are interested in participating, kindly send me an email.
Also, I have just received the 1000BASE-T code from Chris which I will be distributing.
William W. Jones, Ph.D.
Director of Systems Engineering
SolarFlare Communications, Inc.
949-581-6830, ext. 2550