[10GBASE-T] RE: CIR estimation
Viktor
Your questions were not completely clear. Here are the answers based on my interpretation. Feel free to follow up if I answered the wrong question.
1. For computer simulations, try a long FIR filter.
2. Different twisted pairs in the cable will have different delay characteristics.
Slide 10 of the tutorial at the November meeting is the measured frequency response of the coupling functions.
Bill
William W. Jones, Ph.D.
Director of Systems Engineering
SolarFlare Communications, Inc.
949-581-6830, ext. 2550
mobile: 619-405-2445
fax: 949-581-4695
wjones@solarflare.com
-----Original Message-----
From: Ermolayev, Viktor [mailto:viktor.ermolayev@intel.com]
Sent: Monday, January 27, 2003 5:14 AM
To: stds-802-3-10gbt@ieee.org
Cc: George Zimmerman; William Jones
Subject: CIR estimation
I wish great successes to all participants of Reflector.
The team from Intel (N.Novgorod, Russia) was subscribed
stds-802-3-10GBT-Modeling. We are going to make MatLab simulation of 10Gb/s
system as full as possible. We think this system should be provided the
channel estimates more widely than previous one. We have to estimate all
channel impulse responses (CIR). We have studied the presentation by George
Zimmerman and Bill Jones and found the examples of Wire line, Echo, Next and
Fext CIRs. Arising questions are:
1.How can we make Next model, which has such a large delay spread ?
2.Why is the Fext front delay less than Wire line delay?
We have also the question regarding slide 10. Is frequency response or
interference signal spectrum shown on this slide in form of fast oscillating
curve?
Thank you in advance.
Victor on behalf of team.