Thread Links |
Date Links |
||||
---|---|---|---|---|---|

Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |

*To*: STDS-802-3-10GMMF@xxxxxxxxxxxxxxxxx*Subject*: [10GMMF] Connector offsets in Worst case model*From*: "<Joerg-R.> <Kropp>" <Joerg.Kropp@xxxxxxxxxxxx>*Date*: Mon, 9 Aug 2004 11:38:28 +0200*Reply-To*: "IEEE 802.3aq 10GBASE-LRM"<stds-802-3-10gmmf@xxxxxxxxxxxxxxxxx>*Sender*: owner-stds-802-3-10gmmf@xxxxxxxxxxxxxxxxx*Thread-Index*: AcR99J/fb6tyhZR7TA2QvYza3V65ug==*Thread-Topic*: Connector offsets in Worst case model

Jonathan and all, in the conference call I stated that I will give a detailed explaination why we proposed this special set of offsets. We took the same Rayleigh distribution as it was done for the 10GbE -50µm multimode simulation (mean value about 3,6µm and 7µm offset with a probability of 5%). For the second offset we used the value which we get for two connectors (with the same offset) with a combined probability of 5%. For the third offset we used the value which we get for three connectors (with the same offset) with a combined probability of 5%. And similar for the fourth connector. See the short presentation encl. The resulting set of offsets is 7µm, 5µm, 4µm (not 4,5µm!) and 3,5µm (not 3,0µm!) and the overall probability (for exceeding this set of 4 offsets) is p=0,04%, which seems to us as a resonable value for a worst case scenario. Regards, Joerg <<Connector Scenario for Worst Case proposal 2.ppt>> Infineon Technologies Fiber Optics GmbH MOD CE Dr. Joerg-R. Kropp Senior Staff Expert Wernerwerkdamm 16 D-13629 Berlin / Germany Phone -49-30-85400-4918 Fax -49-30-85400-4900 Mail joerg.kropp@infineon.com

Connector Scenario for Worst Case proposal 2.ppt

**Follow-Ups**:**Re: [10GMMF] Connector offsets in Worst case model***From:*Jonathan Thatcher

**Re: [10GMMF] Connector offsets in Worst case model***From:*yusun

- Prev by Date:
**Re: [10GMMF] TP3 Discussion** - Next by Date:
**[10GMMF] site for sharing documents for, time variation and modal noise study group** - Prev by thread:
**Re: [10GMMF] 62MMF Worst Case Connector Offset Calculations** - Next by thread:
**Re: [10GMMF] Connector offsets in Worst case model** - Index(es):