Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[10GMMF] Reminder for TP2 call, 8/19/04



Meeting details (same numbers as before):
  • Date: Thurs, 8/19/04 (regular day/time)
  • Time: 9:00 AM
  • Duration: 1:00 goal, 1:30 max
  • Number: 401-694-1515
  • Access code: 421721#
Topics
  • Approve agenda
  • Approve previous minutes
  • Presentations/results?
    • Cost vs. performance studies (Intel, Opnext, and Bookham?)
    • Non-linear laser effects (Agilent?)
    • Others?
  • TP2 test metrics
 
Thanks,
Tom Lindsay
ClariPhy Communications
tlindsay@ieee.org
phone: (425) 775-7013
cell: (206) 790-3240
 
 
----- Original Message -----
Sent: Monday, August 09, 2004 4:18 PM
Subject: [10GMMF] Minutes/notes for TP2 call, 8/6/04

All - here are my notes for last Friday's TP2 call. Please send corrections.
 
Attendees
  • Martin Lobel, Intel
  • Jan Peeters Weem, Intel
  • Jim Heckroth, Silicon Labs
  • Abhijit Shanbhag, Scintera
  • Andre Van Schyndel, Bookham
  • Piers Dawe, Agilent
  • Tom Lindsay, Norm Swenson, Bharath Jagannathan; ClariPhy
  • Brent Whitlock; RSoft
  • Nick Weiner, PhyWorks
  • Sudeep Bhoja, Big Bear
  • Ed Cornejo; Opnext
  • Lars Thon; Aeluros
  • Others?
Housekeeping
  • Proposed agenda was approved (see below).
  • Previous minutes were approved with the correction on attendance (see below).
  • Project objective statement was approved (see below). There was some discussion on whether to mention interactions with other groups, but it was felt to be sufficiently implied.
  • We decided to not have specific liaison reports from TP3 or channel modeling groups; Given the common attendance by many, if those groups need to represent a relevant point or view to this group, they are encouraged to do so, and vice versa.
  • Dates/location for interim meetings still TBA.
  • Call dates: weekly, Thursdays, 9 AM Pacific time, starting 8/19.
Progress, technical discussions
  • Refer to slides uploaded with tlindsay email to LRM reflector, 8/6/04 AM.
  • 1st slide, with contribution from John Ewen, shows Tx and components. Need to determine which components have the most impact on cost, then evaluate their impact on budget (penalty): % cost savings/dB penalty metric.
  • Effect of TP2 performance may be dominated by long channels. This is the motivation for considering low cost components, such as TO-cans.
  • This work will be implementation-dependent; depending on design approach, levels of integration, etc.
  • Desirable to have existence proof of running 10G traffic with real hardware using low cost components.
  • Some relaxed spec vs. cost work done, but not yet ready to present.
    • Intel is doing work on packaging, impedance mismatches and laser (rate equations, RO, etc.) variations, including use of 4G components.
    • Bookham is performing internal studies, seeing potential of ~10% cost savings.
    • Others?
  • Even though components may be capable of relaxed specs (e.g., risetime), performance should still be controlled (to some level) over the spectrum required for 10G transmission. That is, there may be hidden costs that offset some of the savings.
  • Volume may provide more potential cost savings than relaxation of specs.
  • Relaxed component specs may enable lower costs sooner, allowing market volume to begin sooner.
  • Non-linear lasers do not exhibit Gaussian impulse response - more work required to evaluate range of laser properties against EDC to assess equalizable and non-equalizable power penalties.
  • In trying to focus your work, please consider what inputs are needed from others.
  • Regardless of cost reduction effort, we must determine set of TP2 test metrics to ensure interoperability.
    • Simple mask test does not account for all potential penalties allowed in the current budgets.
    • Goal is for tests to be simple and not high cost.
    • Test metrics should be used during cost studies.
Next call (8/19, 9 AM Pacific time)
  • Expect results of cost vs. performance studies from Intel, Opnext, and Bookham.
  • Agilent may look into non-linear laser effects.
  • Others encouraged.
  • Work on TP2 test metrics must proceed independently.
 
Comments?
Tom Lindsay
ClariPhy communications
tlindsay@ieee.org
phone: (425) 775-7013
cell: (206) 790-3240
 
 
----- Original Message -----
Sent: Friday, August 06, 2004 8:37 AM
Subject: Re: [10GMMF] Planning for TP2 call, 8/6/04

Here are some slides for today's TP2 call, if needed.
 
Tom
 
 
----- Original Message -----
Sent: Thursday, August 05, 2004 2:14 PM
Subject: [10GMMF] Planning for TP2 call, 8/6/04

Meeting details (same as last week):
Date: Friday, 8/6/04
Time: 9:00 AM
Duration: 1:00 goal, 1:30 max
Number: 401-694-1515
Access code: 421721#
We need to agree on a regular time.  Understandably, several have requested we move away from Friday's. The TP3 group has settled on Tuesdays, 9 AM Pacific time. I propose Wednesday's, same time. Will this work?
 
 
Project objectives
I was asked to draft a succinct objective statement for the TP2 group. Try this (with some words borrowed from Mike Lawton):
  • Present a proposal for TP2 signaling parameters and associated conformance testing at the September Meeting. The work must consider and provide tradeoff information among component cost, test cost, and power penalties.
 
Proposed agenda for 8/6
  • Agree on agenda
  • Review previous minutes (see below)
  • Review project objectives (see above)
  • TP3 group liaison report?
  • TP2 task progress
    • Cost models, sensitivities, etc.
    • TP2 test methods
    • Simulation work
    • Experimental work
    • More volunteers?
  • What information is required from others?
  • Expectations for next week
  • Schedule (Interim, tasks, calls, etc.)
 
Previous minutes from last week's meeting are repeated below but with a correction for Yu Sun's attendance. Again, my apologies.
 
 
Thanks, hope to talk to everyone tomorrow. I hope to have some more thoughts on simulation work.
 
Tom Lindsay
ClariPhy Communications
tlindsay@ieee.org
phone: (425) 775-7013
cell: (206) 790-3240
 
 
----- Original Message -----
Sent: Saturday, July 31, 2004 10:45 AM
Subject: [10GMMF] Notes from 1st TP2 working group call, 7/30/04

Attendees
Petar Pepeljugoski; IBM
John Ewen; JDSU
Tom Lindsay, Norm Swenson, Bharath Jagannathan; ClariPhy
Jens Fiedler; Infineon
Mike Fukatsu; OCP
Brent Whitlock; RSoft
Nick Weiner, Ben Wilcox; PhyWorks
Sudeep Bhoja, John Jaeger, Jonathan King; Big Bear
Ryan Latchman; Gennum
Matt Traverso; Opnext
Lars Thon; Aeluros
Pete Hallemeier; Optium
Yu Sun; Optium (correction from 1st release of minutes)
Badri Gomatam; Vitesse
Others?
 
Notes
Discussions were based on Tom's emails of 7/29 (agenda for call) and 7/25 (project outline), as well as lindsay_01_0704. The agenda from the 7/29 email was approved.
 
Purpose and objectives
  • A succinct statement is required. Action to Tom to draft. Cost is a motivation. Per 7/25 email, purpose is to gather and study cost, test methods, and penalty information and make a proposal to the LRM task force in September. I expect refinement will continue beyond that time. Any work from this group may be traded against work from the channel modeling group or the new TP3 group.
  • Work and proposal must include test methods. An important goal is that test methods should be simple and practical to keep test cost low.
  • This group's charter does not include launch geometries. That work is being done as part of the channel modeling. This group's work is focused on the time and frequency domain aspects of signals (masks, edge rates, etc.).
  • The main LRM reflector is to be used.
The high-level task list (per 7/29 email) was approved. Task order was discussed. Cost information must be shared early so that experimental and simulation work know where to focus. Test metrics must be proposed early to also support experimental and simulation work.
  • Propose/develop TP2 test metrics - probably required anyway; see slide 14 of lindsay_01_0704 for initial ideas
  • Simulations - penalty and test metric results vs. signal specs/characteristics
  • Experimental work - penalty and test metric results vs. signal specs/characteristics
  • Develop cost models - relative costs vs. signal specs/characteristics
  • Present tradeoff data and recommendations
The scope of study must include anything that both affects cost and TP2 signaling properties. This includes laser drivers, driver to laser coupling and packaging, laser chips, and optical power coupling efficiency (and electrical drive).
 
Task details need development by the volunteers doing the work, although some thoughts may be available in lindsay_01_0704. Some tasks require inputs from other tasks, such as
  • Experimental work must be guided by where cost benefits may lie.
  • Simulation work must also be guided by where cost benefits may lie but also by the practical range of parameter values determined by limits or availability of actual hardware.
  • Both experimental and simulation work require test metrics/methods to compare their tracking with penalty results.
In general, as folks develop details for progressing their task(s), please determine what information you need from other parts of this group or to share within the same task. This is critical to bound and focus the work.
 
Volunteers
  • Cost
    • Matt Traverso
    • John Ewen
  • TP2 test methods
    • Tom Lindsay
    • Jens Fiedler
    • Matt Traverso
  • Simulations
    • Tom Lindsay
    • Norm Swenson
    • Jens Fiedler
    • Intel (not on the call, but I know they are working on this)
  • Experiments
    • John Ewen
    • Badri Gomatam
    • Intel (not on the call, but I know they are working on this)
More volunteers are requested! Please let me know what you are interested in supporting. There were several folks that indicated interested in this work that were not able to make this call.
 
Schedule
  • Since we are trying to support the September interim, we need to know its dates as soon as possible.
  • Calls will be held ~weekly.
  • Next call will be Friday 8/6 at 9 AM PDT.  Same numbers.
Comments?
 
Tom Lindsay
ClariPhy Communications
tlindsay@ieee.org
phone: (425) 775-7013
cell: (206) 790-3240