Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[10GMMF] Measured 62MMF connector loss with various offsets



Dear All,

Enclosed you will find the experimental verification of the calculated connector loss for various fiber offsets.
I used standard offset patchcord for 62,5Ám fibers for fiber launch and measured the loss for several offsets of the multimode fiber.
The calculation of David Cunningham for this case fits well to the measured values.

Regards
Joerg



-----Original Message-----
From: owner-stds-802-3-10gmmf@listserv.ieee.org [mailto:owner-stds-802-3-10gmmf@listserv.ieee.org] On Behalf Of David Cunningham
Sent: Mittwoch, 18. August 2004 21:25
To: STDS-802-3-10GMMF@listserv.ieee.org
Subject: [10GMMF] 62MMF connector loss and draft test link config


Dear All,

As promised on todays Fiber Channel Ad Hoc I attach a PDF file containing the following information:

* My calculated graphs of connector loss versus offset for overfilled launch, steady state launch and 23 um offset single mode launch.

* The agreed draft of the worst-case test configuration for channel time variation measurements with comments from our call to document our reasoning behind the chosen configuration.

Regards,
David

Connector Loss versus Fiber Offset.pdf