Re: [10GMMF] FW: [10GMMF] Reminder for TP2 call, 8/26/04
Regarding the computation of the EDC coefficients ("using MMSE"), could
you be a little more specific? Did you use an adaptive algorithm to
compute the tap values from the simulated waveform? Typically I think
of MMSE as referring to an analytical solution for the tap values, but
I'm not sure how that would work with a nonlinear channel like this one.
[mailto:email@example.com] On Behalf Of Hanberg,
Sent: Thursday, August 26, 2004 8:46 AM
Subject: [10GMMF] FW: [10GMMF] Reminder for TP2 call, 8/26/04
Regarding todays meeting:
EDC coefficients are obtained using MMSE and yes see the hanberg_1_0304
presentation for BER calculation.
We are able to simulated lasers with peaking and ringing by changing the
gain compression factor. Attached is a figure showing one of the
lasers with a lower gain compression coefficient (eps_nl =2.22e-007).
Any views on how realistic this looks?
The fiber used is ranked as the 22nd worst with regards to PIE_L..
direct: +45 44 54 61 30