Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [10GMMF] Polarization effects for 10GBASE-LRM



Dear David,

This is an excellent work! Thank you so much for your support of task 4
group. I am working on a white paper note, addressing the polarization
rotation and the connector issues in simulations. Your work certainly
covered the first part of the note and provided much detailed explanations.
I will make sure to get the note I am working on ready before next Monday.

Thanks again.

Yu


-----Original Message-----
From: david_cunningham@agilent.com [mailto:david_cunningham@agilent.com]
Sent: Thursday, October 21, 2004 2:55 PM
To: Bottacchi.external@infineon.com; ysun@optiumcorp.com
Cc: STDS-802-3-10GMMF@listserv.ieee.org
Subject: RE: Polarization effects for 10GBASE-LRM

Dear Stefano and Yu,

I attach a PDF file which documents an analysis of SMF offset launch as
a function of polarisation direction.

Stefano:  I now agree with you.
The mathematical analysis I attach shows the effects that you describe
and it is perfectly consistent within the references I quoted.  I now
agree that it is likely to be the launch in combination with incomplete
mode mixing between the modes within groups that is likely to be causing
the change in impulse response (IPR) with polarisation rotation.  The
variation in IPR will be largest when the index perturbations (which are
cylindrically symmetric) cause delay splitting within groups and
significant light power is launched into the modes with such splitting.
I also agree that the scalar wave equation is sufficient to explain
these effects.

Yu: On your call on Monday I said I would provide example calculations
for coupling into the fibre.  Please accept this as my example - the
extension to connectors is straightforward.  It is school mid-term break
here in the UK so I'm taking tomorrow off work.  So this is as much as I
can get done on this this week.  I thought it best to send you what I
had done so far.

Obviously, having worked through the analysis I now agree with your
general method for analyzing connectors too.

Stefano and Yu: Please confirm that my analysis is indeed in agreement
with the concepts you have been advocating to the group.

Sorry for the stress I may have caused you during this debate,
David


 <<LaunchMPDdgc1.pdf>>




>  -----Original Message-----
> From:         Bottacchi Stefano (IFFO MOD CE external)
> [mailto:Bottacchi.external@infineon.com]
> Sent: 18 October 2004 11:35
> To:   david_cunningham@agilent.com
> Cc:   STDS-802-3-10GMMF@listserv.ieee.org
> Subject:      RE: Polarization effects for 10GBASE-LRM
> Importance:   High
>
> David,
>
> please find my comments in blue.
>
>        -----Original Message-----
>       From:   CUNNINGHAM,DAVID (A-England,ex1)
> [<mailto:david_cunningham@agilent.com>]
>       Sent:   Dienstag, 12. Oktober 2004 22:45
>       To:     Bottacchi Stefano (IFFO MOD CE external);
> david_cunningham@agilent.com
>       Cc:     STDS-802-3-10GMMF@listserv.ieee.org
>       Subject:        RE: Polarization effects for 10GBASE-LRM
>
>       Stefano,
>
>       RE: I appreciated your comments and I understand you disagree on
> almost any polarization-dependent effect in MMF transmission, at least
> assuming circular symmetric refractive index without any
> birefringence.
>
>       Ans: This is not quite correct.  My concern is about how the
> task group proposes to model the following:
>
>       1) The excitation of the modes of multimode fibre of circular
> cross section with a monomode, monochromatic source.
>       [Stefano Bottacchi]  Please specify, since it not clear to me
> the reason for your concern.
>
>       2) Birefringence of multimode fibre of circular cross-section.
>       [Stefano Bottacchi]  I agree with you, birefringence of normal
> circular cross section fiber is not responsible for the polarization
> effects we experienced. To clean any doubt, Joerg disassembled the
> spool to lay down the fiber in order to cancel out any potentially
> stressed condition. The measured polarization effects were exactly the
> same of the wounded fiber.
>
>       I am not satisfied with the sketchy models that have been
> briefly outlined so far.  Since no detailed mathematics has been
> presented I cannot check if this is simply a miss-understanding.
>
>       But from what I have understood so far I am compelled to say I
> do not agree with what has been outlined.
>
>       RE: The exciting electric field is linearly polarized. Let us
> choose the Cartesian reference system to represent the vector field
> components Ex, Ey and Ez and let us choose the cylindrical (r,phi,z)
> coordinate system for representing the position. Let us define the
> x-axis along the polarization axis. Modes are the eigensolution of the
> scalar wave equation (Helmoltz equation)
>
>       ANS: The scalar wave equation contains no information about
> polarization. Polarization effects must be added by some other means
> for example the polarization of the modal fields must be set by
> inspection or other knowledge - it is not an output of the scalar wave
> equation. Also, as far as propagation constants are concerned if the
> scalar wave equation is solved then small corrections could be applied
> to account for polarization - but at a fundamental level scalar wave
> solvers do not include polarization effects.
>       [Stefano Bottacchi]  The solution of the scalar wave equation
> represents the complete set of bound modes allowable by that waveguide
> geometry. The choice for x and y axis is arbitrary assuming the
> refractive index is a scalar with no birefringence components. If the
> exciting electric field is linearly polarized along some direction in
> the cross section, we can conveniently choose that direction as one
> coordinate axis (x-axis). Of course, we could also choose x and y axis
> independently from any polarization assumption. In that case we will
> deal with two orthogonal field components acting along respective
> coordinate axis. This gauge just makes mathematics more complicated
> but does not change the physical solution. Now, rotating the linear
> polarized field respect a fixed observer makes the whole mode set
> rotating in the same way respect the fixed reference system. Let us
> assume the fixed spatial orientation is the direction defined by the
> offset coordinate respect the center of the fiber. This is the picture
> we have in mind to justify how polarization takes place in multimode
> fiber when a fixed offset direction is involved. If the refractive
> index is a scalar and the fiber exhibits no asymmetries nor stress,
> there is no reason for any polarization effect, even negligible small.
> Even in single mode fiber, PMD arise just because the fundamental mode
> degeneration breaks into two very slightly different modes due to
> birefringence. This is not the case we are considering. In our basic
> model the multimode fiber is ideal, circular with a true scalar
> refractive index. Polarization effect arise just during the coupling
> between an offset fiber and a given linear polarization.
>
>       If the vector wave equation is solved then there are small
> (very, very small) differences in the propagation constants even for
> modes within the same group due to the optical polarization of the
> modes.
>
>       I would recommend reading Snyder&Love, Optical Waveguide Theory,
> Chapman & Hall 1983 sections:
>       11-15, 13-6,13-7,13-11 for more information.
>       [Stefano Bottacchi]  I have that book (very nice and complete)
> and I red it as my first reference on fiber optic. I will reconsider
> the sections you mentioned anywise.
>
>       Therefore, I accept polarization effects can exist even in
> circular fibres. But, this is unlikely to be the cause of the larger
> birefringence we observe in the lab.
>
>       RE: What happens now if we compute the overlapping integral with
> a small and exocentric (some offset) Gaussian spot? The basic
> conclusion is that the axial symmetry will be definitely broken. The
> overlapping integrals deal with the mode fields, not intensities. The
> coupling coefficient will depend on the cylindrical coordinates on the
> fibre cross section, including both the radial and the angular one.
> For each given mode LP(l,m) the overlapping integral leads to two
> different values for each of the two intrinsic degenerate solutions
> (sine and cosine). The "weight" of the sine and cosine terms will be
> no more the same due to the broken circular symmetry and when the
> intensity of LP(l,m) is computed it will be no more a constant. It
> will be dependent on both cylindrical coordinates, r and phi. In other
> words, the amount of field coupled depends on the relative orientation
> of the offset and the light polarization.
>
>       ANS: I do not agree. Suggest you read the following papers:
>
>       1)  Saijonmaa et al., Applied Optics Vol. 19 No.14
> (15Jul1980)p.2442-2452.
>
>       2) Grau et al., " Mode Excitation in Parabolic Index Fibres by
> Gaussian Beams" AEU, Band 34, 1980, Heft 6 pages 259-265. see Appendix
> 2: Connection between the power coupling coefficients and
> polarization.
>
>       In words these references show that the input optical beam
> polarization can be decomposed into two equivalent orthogonal
> components (reference 2 is much more explicit here):
>
>       A first one parallel to the line from the centre of the exciting
> laser spot to the optical centre of the fibre.
>       A second parallel a line through the centre of the exciting
> laser spot parallel to the tangent to the core/cladding interface of
> the fibre.
>
>       Furthermore, it is shown that the normalized coupling strength
> to each mode of the fibre is the same for each polarization component
> of the beam.
>
>       The two directions, which are defined by the geometry of the
> excitation, define the relevant optical axis for the underlying basis
> modes of the fibre.
>
>       Changing the orientation of the polarization of the input beam
> changes the relative power in each of the underlying orthogonal
> components of the beam.  This leads to an asymmetry in the power
> coupled to the basis modes of the fibre.  That is the same modes are
> always excited in each basis set but the relative excitation of each
> basis set is dependent on the angle of polarization.
>
>       Hence the mode power distribution (MPD) is constant - the same
> modes are always excited.
>
>       There is no rotation of modes at any point in this process -
> only a change in orientation of the polarization of the input beam.
>
>       I don't expect you to believe my words but if I am to accept
> another model I need to know where these
>       [Stefano Bottacchi]  The basic difference is that now we have to
> consider THE POLARIZATION RESPECT TO THE OFFSET DIRECTION. It is this
> angle which is responsible for breaking circular symmetry originating
> polarization dependent coupling coefficients.
>
>
>       RE: We nned only one more brick to close the wall: since the
> fiber is assumed highly dispersive compared to the bit-rate, with a
> not optimized refractive index profile (multiple alpha, kinks,...),
> the different power contributions to the launched pulse will travel at
> different speeds reaching the final section at different time instants
> and leading to pulse broadening.
>
>       ANS: Perturbations which break symmetry are very likely to
> induce polarization splitting of mode groups that have large amounts
> of power in the region of the perturbation.
>       [Stefano Bottacchi]  Why do you introduce perturbations? Offset
> and polarization state are not perturbations.
>
>       If the vector wave equation is solved, with the asymmetric
> perturbation included, this splitting will arise as part of the model.
> If the scalar wave equation is solved correction terms need to be
> calculated.
>
>       BUT IN OUR MODELS THE UNDERLYING REFRACTIVE INDEX PROFILES ARE
> RADIALLY SYMMETRIC.  THEREFORE, EVEN IF THE VECTOR WAVE EQUATION IS
> SOLVED THERE ARE NO SIGNIFICANT POLARIZATION EFFECTS.
>
>       I agree that real fibres are exhibiting significant
> birefringence.
>
>       I DISAGREE THAT THESE EFFECTS CAN BE MODELLED WITH THE CURRENT
> RADIALLY SYMMETRIC REFRACTIVE INDEX PROFILES.
>       [Stefano Bottacchi]  David, I guess there is some
> misunderstanding. I am not assuming any perturbation here. I just
> repeated above the fiber model is pretty ideal, basic like in standard
> textbooks. In order to simplify mathematics we could reach same
> qualitative polarization sensitivity even working with the simpler
> step index fiber.
>
>
>       RE: For a given refractive index profile and fibre length, the
> amount of pulse broadening is therefore a function of the coupling
> coefficient distribution (overlapping integrals) and definitely of the
> relative angle between the offset position and the light orientation.
>
>       ANS: I disagree, you are almost right.  The following is what
> standard theory would say:
>
>       For a multimode fibre excited  with an offset single mode beam
>
>       The input beam can be decomposed into two equivalent orthogonal
> components:
>       A first one parallel to the line from the centre of the exciting
> laser spot to the optical centre of the fibre.
>       A second parallel a line through the centre of the exciting
> laser spot parallel to the tangent to the core of the fibre.
>       [Stefano Bottacchi]  OK, it is an assumption.
>
>       The two directions define the effective optical axis of the
> underlying basis modes of the fibre.
>       [Stefano Bottacchi]  What are more explicitly those "effective
> optical axis"? The exciting electric field is oscillating along its
> polarization axis. Of course I can decompose it along the two
> direction you mentioned above but why should I do this if the fiber is
> circular symmetric?
>
>       The normalized coupling strength to each equivalently polarized
> mode of the fibre is the same for each of the two equivalent
> orthogonal components of the beam.
>       [Stefano Bottacchi]  OK, the fiber is isotropic.
>
>       Changing the orientation of the polarization of the input beam
> changes the relative power in each of the underlying orthogonal
> components of the beam.
>       [Stefano Bottacchi]  OK
>       This leads to an asymmetry in the power coupled to the basis
> modes of the fibre.
>       [Stefano Bottacchi]  OK, the source power distribution between
> the two axis is changing accordingly.
>         That is the same mode groups are always excited with the same
> mode power distribution in each basis set but the excitation of one
> basis set relative to the other is dependent on the angle of
> polarization.
>       [Stefano Bottacchi]  This is not clear to me. Do you assert each
> mode group receive the SAME power independently from the polarization?
> What do you mean with "one basis set relative to the other..." Which
> would be the "other" basis set?
>
>       Therefore, the total normalized MPD remains constant but the
> relative power in each basis mode set varies with the orientation of
> the polarization.
>
>       Therefore, since the MPD remains constant, in models that have
> radial symmetric refractive index profiles, since the propagation
> constants for the two underlying modal polarizations are the same (to
> very, very high precision)  there is no polarization splitting.
>
>       But, if non symmetric refractive index perturbations are
> included in the model and either the vector wave equation is solved or
> polarization corrections are used then birefringence will result.
> Modes with light in the area of the perturbation will be "split" the
> most.
>
>       RE: Of course, fixing the offset position and rotating the light
> polarization leads to the same conclusion and we are facing with the
> polarization induced pulse broadening under offset launching
> condition. This does not deal at all with modal noise. No connector
> was never been involved into all the abovementioned discussion.
>
>       ANS: I assume you mean artificially rotating the underlying
> basis modes in order to change the coupling coefficients and hence
> compute a different MPD.  If this is what you mean then this is
> exactly what I disagree with. I do not agree it is a valid model or
> even a valid approximation.  The MPD does not change.
>
>       Once again, I don't expect you to believe my words but if I am
> to accept another model I need to know where these papers are wrong.
>
>       Regards,
>       David
>       [Stefano Bottacchi]
>       In conclusion I identify two basic points in our discussion:
> *     Is the modal field solution rotating according to the input
> linear polarization orientation? Paper from Saijonmaa et al., Applied
> Optics Vol. 19, No.14 (15Jul1980)p.2442-2452, refers to x-polarized
> light and it does not specify any polarization changing effect.
> *     Once the overlapping integral have been computed, the intensity
> for each mode group is independent from the polarization orientation
> respect to the offset axis?
>
>       Best regards
>
>       Stefano
>
>                -----Original Message-----
>               From:   Bottacchi Stefano (IFFO MOD CE external)
> [<mailto:Bottacchi.external@infineon.com>]
>               Sent:   12 October 2004 08:46
>               To:     david_cunningham@agilent.com
>               Cc:     STDS-802-3-10GMMF@listserv.ieee.org
>               Subject:        Polarization effects for 10GBASE-LRM
>               Importance:     High
>
>               David,
>
>               following the long and interesting conference call held
> this afternoon on Task 4, I would like to clarify the background
> theory I shortly sketched during the discussion. I appreciated your
> comments and I understand you disagree on almost any
> polarization-dependent effect in MMF transmission, at least assuming
> circular symmetric refractive index without any birefringence.
> Nevertheless, since I am fully convinced of its relevance, at least
> starting from our experimental evidence, please find below some more
> detailed reasoning.
>
>               Let us review first few basic assumptions of optical
> fiber modal theory:
>
> *     The fiber has circular symmetry, a circular cross section and
> straight line geometry. No bending effect nor birefringence, neither
> core ovality. I am considering the "classical" MMF model of every
> textbook assuming the refractive index is a scalar quantity depending
> on the radial coordinate only.
> *     The exciting electric field is linearly polarized. Let us choose
> the Cartesian reference system to represent the vector field
> components Ex, Ey and Ez and let us choose the cylindrical (r,phi,z)
> coordinate system for representing the position. Let us define the
> x-axis along the polarization axis. Modes are the eigensolution of the
> scalar wave equation (Helmoltz equation)
> *     The modal field can be separated into the product R(r)F(phi) of
> the radial component R(r) by the harmonic term F(phi) (sine and
> cosine). The latter dependence is only due to the circular symmetry.
> The radial dependence of the refractive index infer only on the radial
> component of the field.
> *     The whole bound modes set constitutes a complete orthonormal
> basis for representing any bound energy propagation. Each LP(l,m) mode
> presents a degeneracy of order 2 according to the two allowable "sine"
> and "cosine" solutions. I would prefer to avoid confusion in
> identifying them as two orthogonal polarizations. For the assumed
> polarization (x-axis oriented), the axial symmetry produces an
> intrinsic degeneration of factor 2 according to the exchanging role of
> the Ex and Ey respect their azimuthal dependence (sine or cosine
> dependence). This degeneration is a consequence of the circular
> symmetry only.
> *     Assuming the weakly guiding approximation WGA still valid, a
> second degeneration holds, namely originating the mode group concept.
> Different mode solutions belongs to the "same" propagation constant
> (Beta) and they propagate with the "same" group velocity  (Quotation
> marks refers to the WGA assumption). Since the radial component of the
> two intrinsically degenerate mode solutions (sine and cosine) is the
> same, the intensity of each LP(l,m) must have circular symmetry, no
> matter how large or small mode numbers could be.
> *     Since mode are orthogonal, results in addition that each mode
> group must have still circular symmetry. As already stated, each mode
> group propagates at a fixed and characteristic velocity. Two different
> mode groups will propagate with different velocities.
>
>               Up to this point I guess you agree on those basic
> assumptions of the modal analysis. In order to compute the amount of
> modal field excitation due to a Gaussian beam incident on the
> launching cross-section we have to introduce the overlapping integral.
> Those integrals represent proper field coupling coefficients by virtue
> of the abovementioned mode orthogonality.
>
>               What happens now if we compute the overlapping integral
> with a small and exocentric (some offset) Gaussian spot? The basic
> conclusion is that the axial symmetry will be definitely broken. The
> overlapping integrals deal with the mode fields, not intensities. The
> coupling coefficient will depend on the cylindrical coordinates on the
> fiber cross section, including both the radial and the angular one.
> For each given mode LP(l,m) the overlapping integral leads to two
> different values for each of the two intrinsic degenerate solutions
> (sine and cosine). The "weight" of the sine and cosine terms will be
> no more the same due to the broken circular symmetry and when the
> intensity of LP(l,m) is computed it will be no more a constant. It
> will be dependent on both cylindrical coordinates, r and phi. In other
> words, the amount of field coupled depends on the relative orientation
> of the offset and the light polarization.
>
>               We nned only one more brick to close the wall: since the
> fiber is assumed highly dispersive compared to the bit-rate, with a
> not optimized refractive index profile (multiple alpha, kinks,...),
> the different power contributions to the launched pulse will travel at
> different speeds reaching the final section at different time instants
> and leading to pulse broadening.
>
>               For a given refractive index profile and fiber length,
> the amount of pulse broadening is therefore a function of the coupling
> coefficient distribution (overlapping integrals) and definitely of the
> relative angle between the offset position and the light orientation.
>
>               Of course, fixing the offset position and rotating the
> light polarization leads to the same conclusion and we are facing with
> the polarization induced pulse broadening under offset launching
> condition. This does not deal at all with modal noise. No connector
> was never been involved into all the abovementioned discussion.
>
>               Please, letr me know you feedback. Hopefully, formal
> theory could follow in few weeks...
>
>               Best regards
>
>               Stefano
>
>
>
>
>               Dr. Ing. Stefano Bottacchi
>               Senior Technical Consultant
>               Concept Engineering
>               Infineon Technologies Fiber Optics GmbH
>               Wernerwerkdamm 16, 13623 Berlin
>               Phone  +49 (0)30 85400 1930
>               Mobile: +49 (0)160 8 81 20 94
>