Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [10GMMF] task2 & task4 launch study table of launch recs rev 0.4



Jonathan,

Sounds good, thank you.

Best Regards,
John George
Systems Engineering Mgr.
FTTP and Premises Applications
OFS Optical Fiber Division
770-798-2432


-----Original Message-----
From: Jonathan King [mailto:jking@bigbearnetworks.com]
Sent: Wednesday, January 19, 2005 7:43 PM
To: johngeorge@ofsoptics.com; IEEE P802.3aq 10GBASE-LRM
Subject: RE: [10GMMF] task2 & task4 launch study table of launch recs rev
0.4

Thanks John
I'll compile references in in a final version of the 'summary of progress'
slide set tonight;
there is a placeholder for that in the rev1 version (which includes
suggestions from today's conference call) which was sent out to the
reflector for comment about ten minutes ago !
best wishes  Jonathan

tel: 1 408 524 5110
e-mail: jking@bigbearnetworks.com
fax: 1 408 739 0568
Jonathan King
Director, Optical Systems
BigBear Networks
345 Potrero Avenue
Sunnyvale, CA 94085
-----Original Message-----
From: owner-stds-802-3-10gmmf@ieee.org
[mailto:owner-stds-802-3-10gmmf@ieee.org] On Behalf Of George, John (John)
Sent: Wednesday, January 19, 2005 3:03 PM
To: STDS-802-3-10GMMF@listserv.ieee.org
Subject: Re: [10GMMF] task2 & task4 launch study table of launch recs rev
0.4

Jonathan,

Thanks for compiling this table. Can you provide references to the any work
showing the equivalence of the offset launch and the corresponding proposed
encircled flux specifications, and of the centered launch and corresponding
encircled flix specifications, in both cases for OM1, OM2, and OM3? Thanks.

Best Regards,
John George
Systems Engineering Mgr.
FTTP and Premises Applications
OFS Optical Fiber Division
770-798-2432

-----Original Message-----
From: Paul Kolesar [mailto:PKOLESAR@SYSTIMAX.COM]
Sent: Wednesday, January 19, 2005 5:32 PM
To: STDS-802-3-10GMMF@LISTSERV.IEEE.ORG
Subject: Re: [10GMMF] task2 & task4 launch study table of launch recs rev
0.4


Jonathan,
With 3 separate tables, as in the current materials, the universal launch
can be presented in a much simpler way now that it is not commingled with
the other launches.  Given that it is universal, one need not call out fiber
types or bandwidth, so the table simply collapses into one column with a
title cell above a spec cell.

Regards,
Paul Kolesar
SYSTIMAX® SOLUTIONS
1300 East Lookout Drive
Richardson, TX 75082
Phone:  972.792.3155
Fax:      972.792.3111
eMail:   pkolesar@systimax.com


Jonathan King <jking@BIGBEARNETWORKS.COM>
Sent by: owner-stds-802-3-10gmmf@IEEE.ORG
01/19/2005 04:01 PM
Please respond to
"IEEE P802.3aq 10GBASE-LRM" <stds-802-3-10gmmf@IEEE.ORG>

To
STDS-802-3-10GMMF@LISTSERV.IEEE.ORG
cc

Subject
Re: [10GMMF] task2 & task4 launch study table of launch recs rev 0.4








With attachment !
As discussed by the group today I've revised the single table into 3
options as proposed by David Cunningham and agreed by those on the call
includes 6um radius spec for OM1 as proposed by Joerg, and an attempt at
an advisory sentence in note 2 as proposed by Lew

feedback very welcome, ASAP
thanks for the input from all into today's call
best wishes

Jonathan

tel: 1 408 524 5110
e-mail: jking@bigbearnetworks.com
fax: 1 408 739 0568

Jonathan King
Director, Optical Systems
BigBear Networks
345 Potrero Avenue
Sunnyvale, CA 94085

[attachment "DraftLaunch-recomm-rev0-4.ppt" deleted by Paul F
Kolesar/CommScope]