Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: SONET/Ethernet clock tolerance


My suggestion is that clock adjustment should happen on Ethernet side of 
the "joint". The
reason is that IPG can be used to compensate for adjustments. This will 
avoid any pointer
adjustments in SONET frames.


At 02:20 PM 3/25/00 -0800, you wrote:

>Dave Martin, Norival Figueira,
>I've been looking at the various requirements for transporting Ethernet over
>SONET and one of them in particular is bothering me. That requirement is 
>the one
>to bridge the clock tolerance of Ethernet (+/-100 ppm) with that of SONET (+/-
>4.6 ppm).
>The root question I have is whether or not current SONET framing or that
>proposed for the Ethernet WAN can accommodate a clock of +/- 100 ppm? This 
>be required to transport the proposed WAN PHY (or UniPHY) across clock domains
>tolerance. I'm asking this question because I'm trying to come up with a
>proposal for SONET framing for the UniPHY which is 100% compatible and 
>with SONET OC/192c and I am using all the WAN PHY information presented by
>yourself and others as a model.
>My understanding from a previous presentation by Paul Bottorff,
>slide 9, is that the payload clock tolerance is 320 ppm. Since I'm unfamiliar
>with the many nuances of SONET framing, can you please acertain that this is
>If the proposed SONET framing for Ethernet is adequate to support +/-100 ppm
>clock tolerance compensation, the second question I have is as to the 
>for performing clock tolerance compensation. It seems to me that the mechanism
>involves at least the rewriting of SPE pointers and the modification of Line
>Overhead Bytes (H1 and H2).
>My further understanding is that the clock tolerance compensation process is
>referred to as one of the 3 "R's" (Re-Amplify, Re-Shape, Re-Time). The 
>process is Re-Timing and is usually reserved to SONET Regenerators and LTE's
>(Line Terminating Equipment). It has been proposed that Transponders for
>coupling an Ethernet WAN PHY to SONET OC-192c can be either "Passive" or
>"Active" according to our agreed upon "WAN PHY Definitions":
> My
>observation is that a transponder which contains both 100 ppm and 4.6 ppm 
>MUST perform re-timing. Therefore, it must be an Active Transponder. This is
>also the case for all WAN PHY elements which cross clock domain boundaries.
>Please help me validate or invalidate my observations.
>If my observations are correct, my suggestion is to not bridge Ethernet to 
>until the SONET boundary is encountered. A WAN PHY, SONET Lite or UniPHY which
>transports SONET framed Ethernet in any manner may require significant
>re-framing at any point that retiming is required.
> > David Martin wrote:
> >
> > How about "SONET-compatible PHY". While I could agree to drop the "WAN"
> > portion of the name, we still need to be clear that our proposal is not a
> > SONET-compliant PHY. There is a significant cost/feature difference. To
> > reiterate,
> > the "SONET-compatible PHY" has the following key differences:
> >
> >   1. minimal OH processing (i.e. only 4 OAM bytes, not SONET's
> >      36-A1/2-H1/4=30)
> >   2. wider clock tolerance (i.e. the usual +/-100ppm, not SONET's 
> +/-4.6ppm)
> >   3. higher jitter tolerance (i.e. >0.15UIpp of SONET, exact value 
> still TBD)
> >   4. low cost optics (i.e. for <40km, not the 80/120km of SONET OC-192)
> >
> > All of which will "bring the cost down out of the stratosphere" to 
> paraphrase
> > a
> > committee member and in line with the 3x1GE target.
> >
> > ...Dave
> >
> > David W. Martin
> > Nortel Networks
> > +1 613 765-2901
> > +1 613 763-2388 (fax)
> > dwmartin@xxxxxxxxxxxxxxxxxx
> >
> > ========================
> >
> >      -----Original Message-----
> >      From:   Bruce Tolley [SMTP:btolley@xxxxxxxxx]
> >      Sent:   Friday, March 24, 2000 2:50 PM
> >      To:     stds-802-3-hssg@xxxxxxxx
> >      Subject:        Renaming the WAN PHY
> >
> >      Colleagues:
> >
> >      To follow up on the suggestion made by Jonathan during the New Mexico
> >      plenary, may I be so bold as to suggest that we change the name of the
> >      "WAN
> >      PHY" to something very simple like PHY with SONET framer.
> >
> >      We need to get the word WAN out of the name of the PHY
> >
> >      o Most common folk outside the esteemed IEEE process think long 
> distance
> >      when they think WAN and on the basis of Paul Bottorf of Nortel,'s
> >      presentations the initial application of the WAN PHY would be for 
> short
> >      links between collocated equipment often in the same room.
> >
> >      2) There are ways to build MANs/WANs that do not require SONET. 
> For 10GbE
> >
> >      some of these MANs/WANs will use the LAN PHY and a 1550 PMD over dark
> >      fiber
> >      or dark wavelengths. The proof point for this is the 1000s of long
> >      distance
> >      1310 nm 1550 nm 1000BASE-X GBICs  that are being deployed today 
> over dark
> >
> >      fiber.  The WAN PHY as stated in the goal does not address the total
> >      possible 10GBE WAN market and confuses people.. This makes it a 
> bad name
> >      in
> >      my opinion
> >
> >      I do not think we necessarily need a motion to change the 
> objective, but
> >      I
> >      think we need to choose our words carefully when we name the PHY 
> that the
> >
> >      objective signifies.
> >
> >      Bruce
> >      Cisco Systems
>Best Regards,
>Richard Taborek Sr.                 Phone: 408-845-6102
>Chief Technology Officer             Cell: 408-832-3957
>nSerial Corporation                   Fax: 408-845-6114
>2500-5 Augustine Dr.        mailto:rtaborek@xxxxxxxxxxx
>Santa Clara, CA 95054