Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: 850 nm solutions





> Jim Tatum writes:
> But why does it matter? Why limit the users? Why not put in the table. It
> costs nothing.  Just put in what the model and data tell us to.  It is
> my opinion that a large percentage of 10GB style links are going to be
> very short, less than 10m.  If you look at the way many fiber ports
> are being used today, many are in the 10m range.  Also, since copper
> cables are going to be EXTREMELY challanged to go that distance at
> 10GB, why not let the market choose the lowest cost solution using
> 850nm VCSELs and 62.5um fiber? 

FWIW, I agree that 10G across CAT-6 or other twisted pair would be very
difficult.  However 10G across coaxial cable is fairly easy.  It can be
done with 0.1" diameter coaxial cable using simple NRZ data encoding.  A
simple FIR pre-equalizer can double this distance.  Without a doubt
copper would be the cheapest solution for links under 10M.  I would
estimate a mature chipset price of about $50 per end and $15 for the
cable. 

This performance was demonstrated in 1998 using a 25GHz bipolar chipset. 
See: Walker, R. C., K. Hsieh, T. A. Knotts and C. Yen, "A 10Gb/s
Si-Bipolar TX/RX Chipset for Computer Data Transmission" , ISSCC Digest
of Technical Papers 41(February 1998), 302,303,450. 

A Copper PHY was voted down by the committee because it was thought that
there was no market for this type of low-cost short distance link. 

kind regards,
--
Rick Walker