Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: Subject: Survey of lengths of installed optical fiber cable




Walter:

A few weeks ago, Corey McCormick of Citgo stated on the HSSG reflector that
they use a lot of jumpers including CX.  He reminded us not to forget short
jumpers in our 10 GbE standard.

Citgo is not the only one needs short jumpers, all computer rooms use a lot
of short jumpers to interconnect adjacent equipment.  10 GbE market will
require jumpers.



Regards,

Edward S. Chang
NetWorth Technologies, Inc.
EChang@xxxxxxxxxxxxxxxx
Tel: (610)292-2870
Fax: (610)292-2872




Subject: RE: Subject: Survey of lengths of installed optical fiber cable



When we discussed this topic a year ago, there was definitely a group
advocating a "jumpers" type solution. However, I thought the outcome of the
discussion was, though we standardized the CX jumper solution in 1 gig,
there has been little (if any) actual customer demand for CX equipment.
Therefore, we didn't want to spend cycles on a "jumper" solution for 10 Gig.

Walt
___________________
Walter Thirion
Chair, IEEE 802.3ae PMD Sub-Task Force
301 Congress Ave.
Suite 2050
Austin, Texas 78701
Voice:	512-236-6951
Fax:	512-236-6959
wthirion@xxxxxxxxxxxx
___________________



> -----Original Message-----
> From: Edward Chang [mailto:edward.chang@xxxxxxxxxxxxxxxx]
> Sent: Monday, May 15, 2000 12:27 PM
> To: Roy Bynum; Chris Simoneaux; stds-802-3-hssg@xxxxxxxx
> Subject: RE: Subject: Survey of lengths of installed optical
> fiber cable
>
>
>
> Roy and All:
>
> I agree with you.  There are large demand on the 100 meter or
> less cables
> within majority of computer installations.  I myself
> experienced with many
> major customers, who use jumper cables (short cables) to
> interconnect all
> sizes of equipment being in the same cabinet, next each
> other, close one
> another, or clustered.  In fact, it is a commonsense
> (cost-effective, and
> convenient), to realize the jumper cables (short cables) are used in
> interconnecting huge numbers of short connections.
>
> Regardless of a short cable being standardized or not, when
> users need them,
> there are plenty of suppliers to fill the needs.  As a
> result, we should
> make sure to provide low-cost 100 meter, or shorter cables to
> industry.
>
>
> Regards,
>
> Edward S. Chang
> NetWorth Technologies, Inc.
> EChang@xxxxxxxxxxxxxxxx
> Tel: (610)292-2870
> Fax: (610)292-2872
>
>
>
>
>
> Subject: Re: Subject: Survey of lengths of installed optical
> fiber cable
>
>
>
> Chris,
>
> I made a presentation at the September '99 interim meeting
> titled "10GbE
> Implementation Architectures".  On page 4 I gave a list of
> different implementation environments for 10GbE.  You might
> take a look at
> it.  One implementation that I did not include, which I
> should have, was "clustered systems".  Clustered systems,
> servers or routers
> (data switches) from the same vendor that are
> interconnected with common process sharing.  These systems
> will use 10GbE at
> distances less than 100m, most likely with proprietary
> interfaces.
>
> >From my experience and talking to large customers and our own network
> out-sourcing people, I have come to the personal conclusion
> that there is a potential large market for a LAN only PHY at
> 100 meters or
> less.  Most, if not all, of these will be greenfield
> upgrade installations, not necessarily replacement upgrades.
> The need for
> short reach 10GbE between systems from the same vendors
> is very high in the Internet and large Enterprise networking
> environments.
> While a common standard for this would be very
> beneficial, I have a feeling that there are several vendors
> with proprietary
> solutions already in process.  The customer base will
> get what they need, even if it is not standardized by IEEE.
> OIF is also
> looking at this issue.
>
> Thank you,
> Roy Bynum
>
> ----- Original Message -----
> From: "Chris Simoneaux" <csimoneaux@xxxxxxxxxxxxx>
> To: "Chris Diminico" <cd@xxxxxxxxxxxxxx>;
> <stds-802-3@xxxxxxxxxxxxxxxxxx>;
> <stds-802-3-hssg@xxxxxxxx>; <cd@xxxxxxxxxxxxxx>
> Cc: "Jack Jewell" <jljewell@xxxxxxxxxxxxx>; "Stan Swirhun"
> <sswirhun@xxxxxxxxxxxxx>
> Sent: Thursday, May 11, 2000 7:50 PM
> Subject: RE: Subject: Survey of lengths of installed optical
> fiber cable
>
>
> >
> > I would suggest we focus on the true application space that
> these links
> will
> > initially operate in, i.e. the intra and inter central
> office/POP, local
> and
> > remote access links.
> >
> > Can we change the survey description?
> >
> > Chris Simoneaux
> >
> > -----Original Message-----
> > From: Chris Diminico [mailto:cd@xxxxxxxxxxxxxx]
> > Sent: Friday, February 04, 2000 8:37 AM
> > To: stds-802-3@xxxxxxxxxxxxxxxxxx; stds-802-3-hssg@xxxxxxxx
> > Subject: Subject: Survey of lengths of installed optical fiber cable
> >
> >
> >
> > Please find below a request issued September 29, 1999 from
> Geoff Thompson
> > (Chair IEEE 802.3) requesting that the IEEE 802.3 members
> respond to a
> > survey
> > designed to characterize the lengths and types of installed
> optical fiber
> > cable.
> >
> > Based on the response to that request, and the importance of the
> information
> > to the development of the higher speed 802.3 standard (10 Gb/s), the
> survey
> > response is requested once more.
> >
> >
> > Your participation is greatly appreciated. The goal is to
> present the
> survey
> > results at the IEEE
> > plenary meeting scheduled for the week of 6 March Albuquerque.
> >
> > To meet that deadline, the survey response is required by
> February 25 th.
> > Forward completed surveys to Chris Di Minico, Mohawk/CDT
>  cd@xxxxxxxxxxxxxx
> > <mailto:cd@xxxxxxxxxxxxxx> ).
> > All lengths are to be reported in meters.
> >
> > The survey documentation is located on the 802.3 web site
> at the following
> > URLs.
> >
> > Geoff's cover letter:
> >
> http://grouper.ieee.org/groups/802/3/10G_study/public/cabling_
> adhoc/public/
> >
> <http://grouper.ieee.org/groups/802/3/10G_study/public/cabling
> _adhoc/public/
> > >
> > Cover_letter.doc
> >
> > Survey document: All lengths are to be reported in meters.
> >
> http://grouper.ieee.org/groups/802/3/10G_study/public/cabling_
> adhoc/public/
> >
> <http://grouper.ieee.org/groups/802/3/10G_study/public/cabling
> _adhoc/public/
> > >
> > HSSG_survey.doc
> >
> > Survey spreadsheet:
> >
> http://grouper.ieee.org/groups/802/3/10G_study/public/cabling_
> adhoc/public/
> >
> <http://grouper.ieee.org/groups/802/3/10G_study/public/cabling
> _adhoc/public/
> > >
> > Fiber_survey_template.xls
> >
> >
> > LBL survey example:
> >
> http://grouper.ieee.org/groups/802/3/10G_study/public/cabling_
> adhoc/public/
> >
> <http://grouper.ieee.org/groups/802/3/10G_study/public/cabling
> _adhoc/public/
> > >
> > HSSG-Survey_LBNL.xls
> >
> >
> >
> >
> --------------------------------------------------------------
> ------------
> --
> > ---------------------------------------------------
> >
> >
> >
> > The following email is sent on behalf of Goeff Thompson,
> Chair of 802.3 by
> > the
> > HSSG Fiber Survey Ad Hoc:
> >
> >
> > September 27, 1999
> >
> > To: IEEE 802.3 Members
> > From: Geoff Thompson, Chair IEEE 802.3
> > Subject: Survey of lengths of installed optical fiber cable
> >
> > Characterization of the lengths and types of installed
> optical fiber cable
> > is an item of critical
> > importance to the development of the higher speed 802.3
> standard (~10
> Gb/s).
> > The attached
> > survey is designed to capture the information necessary to
> determine the
> > installed cabling lengths
> >  in order to specify appropriate physical layer
> specifications for the
> > higher speed standard.
> >
> > We are requesting that each 802.3 member ask a network
> manager  in his/her
> > own company
> > (on a coordinated basis that results in one response per
> company) to fill
> in
> > the following
> > attached survey.
> >
> > For 802.3 members who are employees of network equipment
> vendors, we ask
> in
> > addition that you request that one or more of your
> customers take the time
> > to fill in the survey.
> >
> > Criteria for participation:
> >
> >
> > + OTDR length data on installed links (or equivalent
> detailed data e.g.,
> > where the
> >    lengths had been recorded from the cable length marks).
> >
> > + A minimum of 500 network nodes
> >
> > Your participation is greatly appreciated. The goal is to
> present the
> survey
> > results at our
> >  next plenary meeting which is scheduled for the week of 8
> November in
> > Hawaii.
> >
> >
> >
> > To meet that deadline, the survey response is required by
> October 29th.
> > Forward completed surveys to Chris Di Minico, Mohawk/CDT
>  cd@xxxxxxxxxxxxxx
> > <mailto:cd@xxxxxxxxxxxxxx> ).
> >
> > The survey documentation is located on the 802.3 web site
> at the following
> > URLs.
> >
> > Geoff's cover letter:
> >
> http://grouper.ieee.org/groups/802/3/10G_study/public/cabling_
adhoc/public/
>
<http://grouper.ieee.org/groups/802/3/10G_study/public/cabling_adhoc/public/
> >
> Cover_letter.doc
>
> Survey document:
>
http://grouper.ieee.org/groups/802/3/10G_study/public/cabling_adhoc/public/
>
<http://grouper.ieee.org/groups/802/3/10G_study/public/cabling_adhoc/public/
> >
> HSSG_survey.doc
>
> Survey spreadsheet:
>
http://grouper.ieee.org/groups/802/3/10G_study/public/cabling_adhoc/public/
>
<http://grouper.ieee.org/groups/802/3/10G_study/public/cabling_adhoc/public/
> >
> Fiber_survey_template.xls
>
>
> LBL survey example:
>
http://grouper.ieee.org/groups/802/3/10G_study/public/cabling_adhoc/public/
>
<http://grouper.ieee.org/groups/802/3/10G_study/public/cabling_adhoc/public/
> >
> HSSG-Survey_LBNL.xls
>
> Best Regards,
>
> Geoff Thompson (geoff_thompso@xxxxxxxxxxxxxxx), Chair IEEE
> 802.3
>
>