RE: XAUI Chip Package requirements
I searched the IEEE documents and found no reference to a draft pin out. I
was worried, since Ethernet does not specify such things as pin-outs and I
had thought that there might have been some kind of serious mistake.
My guess is that you confused the IEEE specification with some proposal or
similar work going on in 10 Gigabit Fibre Channel.
Jonathan Thatcher, Principal Engineer
Chair, IEEE P802.3ae (10 Gigabit Ethernet)
World Wide Packets
115 North Sullivan Rd
PO Box 950
Veradale WA 99037
509-242-9228; Fax 509-242-9001;
> -----Original Message-----
> From: Kulwant Brar [mailto:kbrar@xxxxxxxxxxx]
> Sent: Friday, October 13, 2000 4:50 PM
> To: stds-802-3-hssg@xxxxxxxx
> Subject: XAUI Chip Package requirements
> I have the following questions,
> 1) The current version of the draft spec lists the 289 pin,
> 1mm pitch PBGA
> package and pinout assignments to use for the XAUI chip. Is
> it a finalized
> requirement of the standard?
> 2)If there is a committed vender to provide such a package,
> can you please
> send a private e-mail to me.
> (Please do not answer question2 on the reflector, since reflector
> prohibit vender specific info)
> Thank you,
> Kulwant Brar
> Conexant Systems, Inc.