Re: Clause 51 (XSBI) LVDS spec
Yes, there are many vendors that do not necessarily follow the IEEE specs and
yes, we need to have the "tolerance" for these parameters.
I do not think that we want to limit the restrictions of the LVDS interface to
AC coupling. This would be horrendous from a component point of view.
In a message dated 10/20/00 12:39:05 PM Pacific Daylight Time,
> If there is a deviation that we want to allow, we will need to specify
> it. Common mode output voltage tolerance shouldn't be an issue if we
> agree that the interface is AC coupled. Were there other problems?
Quake Technologies, Inc.
50 Airport Parkway, San Jose, CA. 95110
Tel: 408-437-7723 email: justin@xxxxxxxxxxxxx
Fax: 408-437-4923 internet: www.quaketech.com