Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Another clause 49 issue


This has to do with a motion passed during the breakout
session. We agreed to check that the x & y ordered set
IDs have the value "0000" for all the patterns on page
19 of:

We agreed to not check the undefined bits for the ZS and
T0 thru T6 patterns on page 5. This comment is in regards
to the y ordered set ID for the OS pattern on page 19. I
content that this Y ordered set ID is actually mis-labeled
and is, in fact, the result of merely some extra spaces
due to the existence of the S code rather than an
ordered set ID. These bits match up directly with the
extra bits in the ZS pattern on page 5. I'd like to
recommend that we not be required to verify these bits
for the OS pattern.

I doubt you can do anything about this for D2.0 due to the
wording of the motion that was approved in the breakout,
affirmed later in the task force then re-affirmed Thursday
in the working group. However, I just wanted to make others
aware of this and will likely make a comment about this in
the task force ballot in December.


Benjamin Brown
2 Commerce Park West
Suite 104 
Bedford NH 03110
603-641-9837 - Work
603-491-0296 - Cell
603-647-2291 - Fax
603-798-4115 - Home Office