Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: Clock Tolerance and WAN PHY




I just join the email list couple weeks ago.  I have been trying to follow
all the discussions so far.   May I ask a dump question regarding making
10GbE to be supported over leased fiber or privately owned fiber or
wavelengths, why it has to be WAN PHY and not LAN PHY?  I thought the
purpose of WAN PHY is just to make it SONET compatible???  Can anybody
educate me on this rationale??   Please forgive my ignorance.....

-----Original Message-----
From: Roy Bynum [mailto:rabynum@xxxxxxxxxxxxxx]
Sent: Monday, January 29, 2001 5:06 AM
To: rtaborek@xxxxxxxxxxxxx; HSSG
Subject: Re: Clock Tolerance and WAN PHY



Rich,

I am not sure if anyone has done in technical or economic study of how many 
servers within the next two years will be able push close  to 10Gb of data 
into a LAN PHY.  From what I have been told, computer systems today can not 
even push enough to fill a GbE link, much less a 10GbE link.  Without a 
computer/server market, the 10GbE LAN PHY will be relegated to bandwidth 
aggregation within privately owned campus fiber plant or a large data 
room.  The 10GbE WAN PHY, is easily used extended LANs over leased fiber; 
MANs over privately owned or leased fiber and wavelengths; WANs over DWDM 
wave lengths or leased fiber.

Given the amount of GbE that is being used by "legacy-free carriers" in the 
U.S.A. and Europe, and the expansion of the Internet, the need for a 
"service provider" type of Ethernet is becoming a major market 
issue.  Combined with the other uses of the 10GE WAN PHY, I believe that a 
very high percentage (75%?) of 10GbE will be implemented using the WAN 
PHY.  The WAN PHY will be used because it has the operational management 
functionality required.  If P802.3ae does not go ahead and put the 
operational management functionality that is being recommended, all of the 
vendors will be implementing "proprietary" versions that will have it.  If 
P802.3ae does not do it, then the need to do it in proprietary 
implementations will give 802.3 a "major black eye".

I tend to agree with Gary Nicholl in the need for a + 20 PPM 
clock.  Perhaps someone could give a relative cost to implement a + 20 PPM 
clock instead of a + 100 PPM clock.

Thank you,
Roy Bynum


At 08:47 PM 1/27/01 -0800, Rich Taborek wrote:

>Roy,
>
>I'm sorry to have confused you with my comments. Please allow me to try
>and clear up any confusion I may have caused.
>
>The primary purpose of the 10 Gigabit Ethernet project is to provide the
>customer with the next logical speed upgrade to 1 Gigabit Ethernet,
>which provide the same for 100 Megabit Ethernet, which in turn...
>
>Supporting Ethernet over SONET or SDH or OTN or Digital Wrapper, etc. is
>NOT a purpose. This effort is merely a goal or objective which will be
>met, one way or another, while addressing the primary purpose. The
>P802.3ae Task Force has seen fit to set an objective to develop a WAN
>PHY to support Ethernet over SONET. I merely pointed out in my previous
>note on this thread that the WAN PHY is only one of at least seven
>current industry and standards activities to map Ethernet to the
>existing WAN  infrastructure. I believe that at least five of the seven
>methods have been mentioned in this thread alone.
>
>It should be clear that without an optional objective to support the WAN
>PHY, that the 10 Gigabit Ethernet PHY would be developed to support LAN
>and MAN applications anyway. This is because:
>
>a) IEEE 802 is the LAN/MAN Standards Committee (LMSC);
>b) IEEE 802.3z (Gigabit Ethernet) has already opened up the barn door
>with its Fiber Optic technology, significantly increasing the link
>distance supported by prior Ethernet physical layers and capable of
>addressing MAN and WAN applications in addition to LAN;
>c) There are a plethora of startups and large corporations already using
>or eying Gigabit Ethernet and 10 Gigabit Ethernet LAN PHY equipment for
>MAN and WAN application without requiring ATM or SONET at all.
>
>Now back to the subject of this thread...
>
>Clock Tolerance: +/-100 PPM is more than adequate for the 10 Gigabit
>Ethernet LAN PHY. In fact, this tolerance is fairly difficult to achieve
>as it corresponds to the 10.3125/3.125 Gbps line rate for the
>Serial/WWDM, respectively, rather than the clock oscillator. The clock
>oscillator frequency may actually be ~1/100 the line rate and is likely
>multiplied up to the line rate.
>
>In the interest of standing a chance of meeting the IEEE P802.3ae
>economic feasibility criteria, I strongly suggest keeping the clock
>tolerance of the Ethernet PHY at +/- 100 PPM. This goes for both the LAN
>and WAN PHYs since the WAN PHY would benefit greatly from the sharing
>common components with the LAN PHY.
>
>
>
>Roy Bynum wrote:
> >
> > Rich,
> >
> > You have a very good a presenting that would seem reasonable to those
who
> > don't have any experience in attempting to implement what you are
> > proposing.  The objectives of P802ae include a WAN PHY.  What
constitutes a
> > WAN PHY has been explained to the group by those of us that have worked
in
> > a WAN optical environment.  You keep miss representing the requirements
of
> > a WAN PHY by presenting a LAN implementation as a WAN.  It works very
well
> > at confusing those that are attempting to gain an understanding of what
the
> > issues are.
> >
> > Those of us that have worked in the WAN optical environment are not
> > confused by your comments.  Those of us that have worked in the WAN
optical
> > environment would like to have the opportunity to educate those that
would
> > actually like to gain a understanding of what the real world 
> requirements are.
> >
> > Thank you,
> > Roy Bynum
> >
> > At 06:39 PM 1/24/01 -0800, Rich Taborek wrote:
> >
> > >Boaz,
> > >
> > >I strongly agree with your suggestion below, and Brad Booth's note
along
> > >the same vein, to leave any conversion between Ethernet and SONET at
the
> > >ELTE level. This would allow the LAN PHY, Serial or WWDM, it doesn't
> > >really matter since the ELTE does the required conversion, to natively
> > >serve LAN, MAN and WAN applications at the lowest possible cost. At the
> > >same time, the same LAN PHY can attach to an ELTE and operate in "WAN
> > >PHY mode" to support SONET/SDH. The latter would be applicable to those
> > >legacy SONET/SDH core applications, again, AT THE LOWEST POSSIBLE COST.
> > >
> > >Of paramount importance to the customer is our ability to meet the
> > >Economic Feasibility PAR criteria. In a nutshell this criteria states
> > >that the cost of 10GE shall be ~3.5X the cost of Gigabit Ethernet at
> > >product maturity. I don't visualize copying SONET/SDH, requiring +/-20
> > >PPM clock tolerance, supporting overhead bytes, etc. as helping us meet
> > >our economic feasibility objectives. However, I do see straightforward
> > >mappings, the same clock tolerances as Gigabit Ethernet (+/-100 PPM),
> > >protocol simplicity, relaxed jitter specifications, etc. as meeting the
> > >objectives. The latter are characteristics of the LAN PHY, the former
> > >are characteristics of the WAN PHY.
> > >
> > >Ethernet has met its economic feasibility objectives for three
> > >generations through selection and leverage of low cost physical layers.
> > >This will happen again through simple extension of Gigabit Ethernet
> > >physical layer technology as is the case for the LAN PHY. It should be
> > >obvious to the most casual observer that the more that SONET/SDH is
> > >leveraged for 10GE, the higher the total 10GE solution cost will be.
> > >
> > >Just reading though the notes of this thread, it looks like there's
> > >about as many ways to map Ethernet to SONET as there are to skin a cat.
> > >Here are some of the ones from this thread:
> > >
> > >1) Ethernet over LAPS, ITU-T SG7
> > >2) Packet over SONET, ???
> > >3) Ethernet over SONET/SDH, ITU-T SG7 X.86
> > >4) Ethernet over SONET/SDH, T1X1
> > >5) Digital Wrapper, ITU-T ???
> > >6) G.709, ITU-T (Same as Digital Wrapper???)
> > >7) IEEE P802.3ae WAN PHY
> > >
> > >I'm kind of partial to Ethernet over Ethernet.
> > >
> > >KISS
> > >
> > >Best Regards,
> > >Rich
> > >
> > >--
> > >
> > >Boaz Shahar wrote:
> > > >
> > > > MAC - (Serial lan phy) - ELTE - (sonet ring) - ELTE - (serial lan
phy)
> > > - MAC
> > > >
> > > > Anyway, the WIS takes 64/66 frames and encapsulates them into the
SONET
> > > > frame. So just take the 66/64 bit stream that comes to the ELTE 
> through the
> > > > serial LAN and do the same there with a full SONET compliancy. Is
that
> > > > correct? What is the advantage comes from doing the WIS in the PHY? 
> (The
> > > > rate is not a problem Just operate the MAC in SONET rate as you do 
> anyway
> > > > and put the FIFO in the ELETE as you anyway have in the WIS)
> > > >
> > > > Thanks (Sorry for the long mail)
> > > > Boaz
>
>--
>
>Best Regards,
>Rich
>
>-------------------------------------------------------
>Richard Taborek Sr.                 Phone: 408-845-6102
>Chief Technology Officer             Cell: 408-832-3957
>nSerial Corporation                   Fax: 408-845-6114
>2500-5 Augustine Dr.        mailto:rtaborek@xxxxxxxxxxx
>Santa Clara, CA 95054            http://www.nSerial.com