RE: Clause 49 Localfault
I don't understand what makes you think that.
The or of reset, hi_ber, and !block_lock is a global transition into the
RX_INIT state which sends LF (see figure 49-15 on page 344 of D3.0). The
three conditions are all treated exactly the same by the receive state
machine. Clause 49 completely defines the conditions that require sending
From: Justin Gaither [mailto:jgaither@xxxxxxxxxxxxxxx]
Sent: Tuesday, April 10, 2001 12:09 PM
Subject: Clause 49 Localfault
Should the RX state machine send LocalFault when HIBER or !Block lock?
Currently it only sends LF out of reset.
Clause 48 has a specific section that defines when LF should be
sent(!aligned). Clause 49 does not.
Justin Gaither Phone: 512-306-7292 x529
RocketChips a Division of Xilinx Fax: 512-306-7293
500 N. Capital of TX Hwy.
Bldg 3 email: jgaither@xxxxxxxxxxxxxxx
Austin, TX 78746 WWW: www.rocketchips.com