Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: XAUI and 64b/66b




I don't know about Rich, but I definitely agree with you. The interface on
each side of XAUI should be XGMII. If the implementer chooses a different
i/f that is his choice.

Walt

> -----Original Message-----
> From: Benjamin J. Brown [mailto:bebrown@nortelnetworks.com]
> Sent: Thursday, March 16, 2000 1:08 PM
> To: 802.3ae; Rich Taborek
> Subject: XAUI and 64b/66b
> 
> 
> 
> 
> Rich,
> 
> Jonathan just sent me a note saying that I was even confusing
> him right now so I want to stop and ask my question again. I'll
> try to make this as clear as possible.
> 
> In the layer diagram that Brad showed in Albuquerque, the XAUI
> was shown as an XGMII extender. To me this means that the
> reconcilation sub-layer speaks using XGMII language and the PCS
> listens using XGMII language. The XAUI can extend this interface
> by translating from XGMII to XAUI but it must translate back
> again before it gets to the PCS. The XGXS block is the translator.
> 
> The 64b/66b proposal as written ignores the XGXS block between
> XAUI and the PCS. It is my contention that, though this would
> work, it is unnecessary and even burdensome to those implementors
> that choose to not use XAUI. 64b/66b would work equally as well
> without the XAUI specific control codes as they add nothing to
> the efficiencies of 64b/66b (that I can tell). The XGMII specific
> control codes are completely adequate for 64b/66b. In my opinion,
> a serial PCS should be specified as if XAUI didn't exist.
> 
> I'll even go so far as to state that, in my opinion, even a
> parallel/CWDM PCS should be specified as if XAUI didn't exist.
> If this PCS turns out to be identical to the XGXS block then some
> implementors may choose to avoid the encode/decode/encode as
> specified in the standard, but I believe that is how it should
> be specified.
> 
> Is the question/comment still confusing or do you merely disagree?
> 
> Ben
> 
> -- 
> -----------------------------------------
> Benjamin Brown
> Router Products Division
> Nortel Networks
> 1 Bedford Farms,
> Kilton Road
> Bedford, NH 03110
> 603-629-3027 - Work
> 603-629-3070 - Fax
> 603-798-4115 - Home
> bebrown@nortelnetworks.com
> -----------------------------------------
>