Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: What is 802.3ae WAN-PHY?




Roy,

Yes, I am assuming that the ELTE has something to do with Ethernet.  
As I understand, the emerging non-muxing LTE requires SONET-
compliant input. I would like to remind you that at present I see no 
SONET-lite standard in the real world.
http://grouper.ieee.org/groups/802/3/10G_study/email/msg01878.html
Therefore, at least you need to customize the Ethernet side of the 
non-muxing LTE to accomodate +/-100ppm SONET-imcompliant input.  

I don't believe this customization makes sense because;

(1) it will bring nothing other than confusion, as Jay and Gary has 
    pointed out. 
http://grouper.ieee.org/groups/802/3/10G_study/email/msg01940.html
http://grouper.ieee.org/groups/802/3/10G_study/email/msg01955.html

(2) There seems to be little cost advantage in +/-100ppm as Nevin has
    pointed out. 
http://grouper.ieee.org/groups/802/3/10G_study/email/msg01848.html

Please do not force us to stick in SONET framing optimized for the
legacy synchronous transport systems.
http://grouper.ieee.org/groups/802/3/10G_study/email/msg01895.html
You are free to invest both the SONET-imcompliant PHY and the ELTE, 
but please understand that there are other carriers who must compete 
with each other and hence require inexpensive future-proof OAM&P 
signaling for datacom WAN.  To drive it, I will propose SONET-
compatible XGENIE that enables us to carry SONET overhead bytes or 
its equivalence without using the SONET framing.  I don't think 
this is a full greenfield development; just a kind of 1:1 mapping 
between XGENIE ordered sets and SONET overhead bytes.

Best Regards,
Osamu 

At 2:47 PM -0500 00.4.6, Roy Bynum wrote:
> Osamu,
> 
> Are you making the assumption that ELTE has anything to do with Ethernet?
> ELTE is a fake name that was used by the nomenclature group to as a place
> holder for a non-muxing LTE.  The ELTE is refereeing to the new class of
> SONET/SDH optical switch gear that has been developed specifically to
> support high bandwidth concatenated services.  There are several telephony
> vendors that are developing this equipment with the view to start deployment
> this year to support the OC192C/STM64C Packet Over SONET/SDH interfaces for
> Internet Routers.
> 
> Please make the assumption that SONET framing will be used.  Otherwise it
> will require a full greenfield development cycle and extended deployment
> cycle for the long haul transport systems.  This is in violation of the
> objective to use existing technology where ever possible.
> 
> Thank you,
> Roy Bynum
> ----- Original Message -----
http://grouper.ieee.org/groups/802/3/10G_study/email/msg02121.html