Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: Patch cord for 1300 WWDM




Roy,

I could just as easily argue that, since 1300 nm WWDM satisfies
300 meters on both 62.5 and 50 um installed MMF (which NONE of the
other PMDs can do), 300 meters on the enhanced BW MMF,  and in 
addition satisfies 10 km on SMF, why not drop all the 850 PMDs 
and drop 1300 nm serial as well?  If your goal is to minimize 
PMD choices, this would be more efficient than what you suggest.

Dave Dolfi
Agilent Technologies

 

> From owner-stds-802-3-hssg@ieee.org Wed Aug  2 22:27:10 PDT 2000
> Return-Path: <owner-stds-802-3-hssg@ieee.org>
> Received: from unicorn.labs.agilent.com (unicorn.labs.agilent.com 
[130.29.252.5])
	by aldolfi.labs.agilent.com (8.9.3 (PHNE_18979)/8.9.3 AgilentLabs 
Workstation) with ESMTP id WAA18415
	for <dolfi@aldolfi.labs.agilent.com>; Wed, 2 Aug 2000 22:27:09 -0700 
(PDT)
> Received: from alex1.labs.agilent.com (alex1.labs.agilent.com [130.29.252.55])
	by unicorn.labs.agilent.com (8.10.2/8.10.2/Agilent Labs Mail Hub v 01.00 
2000/06/20) with SMTP id e735R8m19128
	for <dolfi@aldolfi.labs.agilent.com>; Wed, 2 Aug 2000 22:27:08 -0700 
(PDT)
> Received: from 130.29.252.5 by alex1.labs.agilent.com (InterScan E-Mail 
VirusWall NT); Wed, 02 Aug 2000 22:24:36 -0700 (Pacific Daylight Time)
> Received: from hplms26.hpl.hp.com (hplms26.hpl.hp.com [15.255.168.31])
	by unicorn.labs.agilent.com (8.10.2/8.10.2/Agilent Labs Mail Hub v 01.00 
2000/06/20) with ESMTP id e735R5Q19105;
	Wed, 2 Aug 2000 22:27:06 -0700 (PDT)
> Received: from hplms2.hpl.hp.com (hplms2.hpl.hp.com [15.0.152.33])
	by hplms26.hpl.hp.com (8.9.3 (PHNE_18979)/HPL-PA Relay) with ESMTP id 
WAA21871;
	Wed, 2 Aug 2000 22:27:04 -0700 (PDT)
> Received: from hplms26.hpl.hp.com (hplms26.hpl.hp.com [15.255.168.31])
	by hplms2.hpl.hp.com (8.10.2/8.10.2 HPL-PA Hub) with ESMTP id 
e735R2105766;
	Wed, 2 Aug 2000 22:27:02 -0700 (PDT)
> Received: from ruebert.ieee.org (ruebert.ieee.org [199.172.136.3])
	by hplms26.hpl.hp.com (8.9.3 (PHNE_18979)/HPL-PA Relay) with ESMTP id 
WAA21855;
	Wed, 2 Aug 2000 22:27:00 -0700 (PDT)
> Received: by ruebert.ieee.org (8.9.3/8.9.3)	id AAA04987; Thu, 3 Aug 2000 
00:46:55 -0400 (EDT)
> Message-Id: <4.3.2.7.2.20000802225614.00acc4b0@pop.mindspring.com>
> X-Sender: rabynum@pop.mindspring.com
> X-Mailer: QUALCOMM Windows Eudora Version 4.3.2
> Date: Wed, 02 Aug 2000 23:08:14 -0500
> To: David W Dolfi <dolfi@saiph.labs.agilent.com>, stds-802-3-hssg@ieee.org
> From: Roy Bynum <rabynum@mindspring.com>
> Subject: Re: Patch cord for 1300 WWDM
> Cc: dave_dolfi@agilent.com
> In-Reply-To: <200008022111.OAA11538@saiph.labs.agilent.com>
> Mime-Version: 1.0
> Content-Type: text/plain; charset="us-ascii"; format=flowed
> Sender: owner-stds-802-3-hssg@ieee.org
> Precedence: bulk
> X-Resent-To: Multiple Recipients <stds-802-3-hssg@majordomo.ieee.org>
> X-Listname: stds-802-3-hssg
> X-Info: [Un]Subscribe requests to  majordomo@majordomo.ieee.org
> X-Moderator-Address: stds-802-3-hssg-approval@majordomo.ieee.org
> Content-Length: 2774
> Status: RO
> 
> 
> David,
> 
>  From your last paragraph, am I to understand that 850nm CWDM will meet the 
> objective of 100m over installed 62.5u MMF and the 300m objective over 
> (implied) new MMF.  With 850nm VCSEL technology is already available for 
> the 850nm CWDM, why do we need the 1300nm WWDM?  The SMF objectives are 
> already addressed by the 1300nm 10km and 1500nm 40km PMDs.  If the TF wants 
> to trim PMDs, drop the 1300 WWDM PMD.
> 
> Thank you,
> Roy Bynum
> 
> At 02:11 PM 8/2/00 -0700, David W Dolfi wrote:
> 
> 
> >Everyone,
> >
> >
> >There seems to have been some confusion at the La Jolla
> >meeting over the necessity for an offset patch cord for
> >1300 nm WWDM.  Because of this, and additional comments
> >made on the reflector since the meeting, I am writing
> >this email to clarify the situation.
> >
> >Fact 1. An offset patch cord is NOT required for 1300 nm
> >WWDM in order to meet the current MMF objectives of 802.3ae.
> >That is to say, it is NOT required in order to achieve a 100
> >meter link length on the installed base (this includes both
> >62.5 and 50 um standard MMF, which both have a 500 MHz-km OFL
> >bandwidth length product at 1300 nm), NOR is it requred to
> >achieve a 300 meter link length on the new enhanced BW
> >MMF, which also has a 500 MHz-km OFL bandwidth at 1300 nm.
> >
> >Needless to say (but I will for the sake of completeness)
> >1300 nm WWDM also supports single mode fiber up to 10 km,
> >again without a patch cord.
> >
> >
> >Fact 2.  The ONLY time you need to use a patch cord with
> >1300 nm WWDM is if:
> >
> >1. You want to extend the link length of the MMF installed base
> >to 300 meters
> >
> >AND IN ADDITION TO THIS
> >
> >2. The fiber in question is "DMD challenged".
> >
> >
> >Please note that if you are in this particular situation, none
> >of the 850 nm based PMDs will satisfy your need, patch cord or
> >not (but see Note below).  Your only alternative in this situation,
> >with an 850 nm PMD, is to install new fiber, either the enhanced BW
> >multimode fiber or single mode fiber.  Therefore, the notion that
> >the patch cord is some sort of "penalty" you pay for using 1300 nm
> >WWDM is really the wrong way to think about it.  Rather than a
> >shortcoming, it is actually a benefit, since it gives you the (rel-
> >atively speaking) low cost option of using a patch cord in a sit-
> >uation where your only other alternative is to pull new fiber.
> >
> >Note: The 850 nm 4 channel CWDM PMD will allow you a 300 meter link
> >length, without a patch cord, on the installed base of 50 um fiber
> >ONLY.  However, this is a small benefit, since the great majority
> >of the MMF installed base is 62.5 um fiber, on which 850 nm CWDM
> >will only support a 100 meter link length (due to the fact that
> >62.5 um fiber has an OFL bandwidth length product of only 160
> >MHz-km at 850 nm).
> >
> >
> >David Dolfi
> >Agilent Technologies
>