Prosun,
In answer
to your questions:
- The WIS
Link Status bit (2.1.12 in Table 45-12) is described in Section 50.3.7.1.2
of the WIS clause, and relates to the WIS_SIGNAL.indicate service
primitive described in Section 50.2.4. As the editorial note in clause 45
indicates, a reference to Section 50.3.7.1.2 will eventually be inserted
on page 181.
- The
declaration of Local Fault by the WIS is covered by Section 50.3.5.1; this
section describes the various events that trigger a reporting of local
fault to the PCS as well as to layer management.
Hope this
answers your questions.
Regards,
Tom
Alexander
PMC-Sierra,
Inc.
-----Original
Message-----
From: Prosun Chatterjee
[mailto:prosun@pune.coreel.com]
Sent: Thursday, December 14, 2000
2:37 AM
To: HSSG
Subject: Clause 49 WIS Status
Register doubts
Hi,
Has there been any further deliberation on
what
"WIS Link Status" represents? (Table 45-12 on
pg. 181; bit 2.1.12)
Also, what does the Fault bit(WIS detected
LF;
bit 2.1.10) constitute? I.e, what all leads to
declaring a LF?
Prosun