RF/LF
Rich,
Unfortunately I missed the discussions about RF/LF (Had to be in the XAUI
sessions). From the least I sow at the end, I thought that only the Tx
machine in the PCS-PMA of the DTE-XGXS considering any of the faults (In
order to come to a state where you transmit POS after /A/). Is this correct?
And:
In the Rx direction you do not have to alternate the XGMII anymore-rather
you send the POS code whenever it comes, because the RS resets its machine
only after 128 non fault indicated bytes, and the max distance between POS
is 32 (Max A distance).
Is this correct?
Thx. for your help,
Boaz
> -----Original Message-----
> From: Rich Taborek [mailto:rtaborek@earthlink.net]
> Sent: Tuesday, January 23, 2001 3:04 AM
> To: 802.3ae
> Subject: Re: LSS Protocol
>
>
>
> James,
>
> The DTE-XGXS includes the functions of the PCS and PMA specified in
> Clause 48. Therefore, it contains PCS state machines which include
> support for RF/LF.
>
> Best Regards,
> Rich
>
> --
>
> James Colin wrote:
> >
> > Ben,
> > I think that this is a good decision that makes things
> > simpler.
> > This means that there are no state machines in the
> > DTE-XGXS? It does not have to recognize the RF/LF
> > conditions (Assuming it does not generate LF)?
> > Thanks,
> > James.
> >
> > --- Ben Brown <bbrown@amcc.com> wrote:
> > >
> > >
> > > James,
> > >
> > > LSS was dropped in Tampa back in November. In
> > > Irvine, some
> > > comments were resolved regarding Local Fault and
> > > Remote
> > > Fault by the generation and acceptance of a state
> > > machine
> > > (both a figure and text) to be put into clause 46.
> > > This
> > > will be available as part of the comment resolution
> > > data
> > > base and should be published later this week.
> > >
> > > Ben Brown
> > > Chair, P802.3ae Logic Track
> > >
> > > James Colin wrote:
> > > >
> > > > Hi,
> > > > Can anyone help with a quick update about the LSS
> > > > Protocol defined in Irvine?
> > > > Thanks, James
>
> -------------------------------------------------------
> Richard Taborek Sr. Phone: 408-845-6102
> Chief Technology Officer Cell: 408-832-3957
> nSerial Corporation Fax: 408-845-6114
> 2500-5 Augustine Dr. mailto:rtaborek@nSerial.com
> Santa Clara, CA 95054 http://www.nSerial.com
>