Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: [802.3ae] Equation errors in Annex 48



Title: Equation errors in Annex 48
I agree. These should be picked up as editorial comments to 802.3ae. Are you planning to do this, or should I?
 
Notes for Fibre channel MJS document users: the equation in MJS that is equivalent to the one here on page 341 is also incorrect. It appears to be a conversion error, as the *.doc source was correct. The other equation (equivalent to the one on page 340) is correct in MJS. Not sure how it became errored in 10GE.
 
Tom Lindsay
Stratos
-----Original Message-----
From: Fenghao Mu [mailto:fenghao.mu@switchcore.com]
Sent: Monday, February 04, 2002 4:46 AM
To: stds-802-3-hssg@ieee.org
Subject: [802.3ae] Equation errors in Annex 48

Hello,

When I look at the Draft 4.0 Annex 48, I find a few errors in equations:

1. Page 340, Line 52, the integral should from Tau_sample to infinitive, otherwise
        result is minus.
2. Page 341, Line 3,
        a. The function is JT instead of TJ
        b. The low limit in the integral should be minus infinitive.

Please check. Thanks

Best regards
       
Fenghao Mu, Ph. D.
Staff Engineer, ASIC Development
e-mail: fenghao.mu@switchcore.com
SwitchCore AB       Tel: +46 46 270 25 85(o)
Emdalavägen 18      fax: +46 46 270 25 81
S-223 69  LUND
SWEDEN              homepage: www.switchcore.se