Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_4PPOE] End to End Channel Pair to Pair Unbalance Ad Hoc Presentation



FYI I will have some interesting simulation to show next week (on the reflector) on this topic which may help us. 

 

Regards,

 

Jeff Heath
Design Center Manager

Description: Linear Technology Corporation

 

 

paper:

402 East Carrillo Street, Suite D

 

Santa Barbara, California 93101

voice:

805.965.6400

fax:

805.965.1701

computer:

jheath@xxxxxxxxxx

 

www.linear.com

 

 

From: Larsen, Wayne [mailto:WLARSEN@xxxxxxxxxxxxx]
Sent: Thursday, July 03, 2014 6:13 AM
To: STDS-802-3-4PPOE@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_4PPOE] End to End Channel Pair to Pair Unbalance Ad Hoc Presentation

 

 

 

Hi Yair,

 

Would the existence of a spec, such as, not more than the max of .2 Ohms (or .1 Ohms) or 7% (or 6%) achieve this closure?

 

Wayne

7/3/14

 

 

 

 

From: Darshan, Yair [mailto:YDarshan@xxxxxxxxxxxxx]
Sent: Thursday, July 03, 2014 8:01 AM
To: Larsen, Wayne; STDS-802-3-4PPOE@xxxxxxxxxxxxxxxxx
Subject: RE: [802.3_4PPOE] End to End Channel Pair to Pair Unbalance Ad Hoc Presentation

 

Hi Wayne,

 

Wayne I agree that we shouldn't be worried about.

The question is how to convert "don’t worry it is unrealistic in real installations" to "don’t worry, the spec says A, B, C"  therefore don’t worry.

I am looking for some text/other means to close this hole in the future spec so if someone during tests will have "unrealistic channel" that is used in the lab and not in real life installation I can point him to the spec and say "this is wrong setup ..and this is why, see the spec." .

 

I am working on such closure.

 

Yair

 

From: Larsen, Wayne [mailto:WLARSEN@xxxxxxxxxxxxx]
Sent: Thursday, July 03, 2014 3:31 PM
To: Darshan, Yair; STDS-802-3-4PPOE@xxxxxxxxxxxxxxxxx
Subject: RE: [802.3_4PPOE] End to End Channel Pair to Pair Unbalance Ad Hoc Presentation

 

 

 

My opinion would be that the unrealistic use cases do not need to be worried about.

 

 

 

 

 

From: Darshan, Yair [mailto:YDarshan@xxxxxxxxxxxxx]
Sent: Thursday, July 03, 2014 2:12 AM
To: Larsen, Wayne; STDS-802-3-4PPOE@xxxxxxxxxxxxxxxxx
Subject: RE: [802.3_4PPOE] End to End Channel Pair to Pair Unbalance Ad Hoc Presentation

 

Hi Wayne,

 

This solution, filters the "unrealistic use cases" that were resulted from short cables.

How it helps?

If we set a limit for the channel for 7%, and a user did use cabling and connectors combinations that is considered "not typical use case" or even "not realistic use case" and he got 12% it will be an issue for him. The spec says A and he got B.

This filters all the results of B which are not relevant to him when the channel is tested as standalone part.

The justification for this approach is, when the channel is connected to a system, and the channel uses short cables, the End to End current/resistance unbalance will be dominant since their unbalance is higher than the channel.

 

This is one of the solutions from the table.

There is 5th solution that in after our adhoc meeting Sterling and I were discussing and I am working on its details.

 

Regards

 

Yair

 

 

From: Larsen, Wayne [mailto:WLARSEN@xxxxxxxxxxxxx]
Sent: Thursday, July 03, 2014 6:09 AM
To: Darshan, Yair; STDS-802-3-4PPOE@xxxxxxxxxxxxxxxxx
Subject: RE: [802.3_4PPOE] End to End Channel Pair to Pair Unbalance Ad Hoc Presentation

 

 

 

Hi Yair,

 

You showed a spreadsheet of four possible solutions, and one of them was to measure the DC resistance unbalance of the cabling channel with resistors in series with it. 

 

What is the problem these solutions are solving?

 

Wayne

7/2/14

 

 

 

 

From: Darshan, Yair [mailto:YDarshan@xxxxxxxxxxxxx]
Sent: Wednesday, July 02, 2014 7:15 PM
To: Larsen, Wayne; STDS-802-3-4PPOE@xxxxxxxxxxxxxxxxx
Subject: RE: [802.3_4PPOE] End to End Channel Pair to Pair Unbalance Ad Hoc Presentation

 

H Wayne,

Your question Is not clear to me can you elaborate?

Yair

 

From: Larsen, Wayne [mailto:WLARSEN@xxxxxxxxxxxxx]
Sent: Wednesday, July 02, 2014 11:38 PM
To: STDS-802-3-4PPOE@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_4PPOE] End to End Channel Pair to Pair Unbalance Ad Hoc Presentation

 

 

 

Hi Yair,

 

I was trying to ask, what problem is being solved by this?

 

Wayne

7/2/14

 

 

 

 

From: Jeff Heath [mailto:jheath@xxxxxxxxxx]
Sent: Wednesday, July 02, 2014 11:25 AM
To: STDS-802-3-4PPOE@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_4PPOE] End to End Channel Pair to Pair Unbalance Ad Hoc Presentation

 

Please announce when and why the ‘formal meeting’ has ended in the future.

 

Regards,

 

Jeff Heath
Design Center Manager

Description: Linear Technology Corporation

 

 

paper:

402 East Carrillo Street, Suite D

 

Santa Barbara, California 93101

voice:

805.965.6400

fax:

805.965.1701

computer:

jheath@xxxxxxxxxx

 

www.linear.com

 

 

From: Darshan, Yair [mailto:YDarshan@xxxxxxxxxxxxx]
Sent: Wednesday, July 02, 2014 9:00 AM
To: Jeff Heath; STDS-802-3-4PPOE@xxxxxxxxxxxxxxxxx
Subject: RE: [802.3_4PPOE] End to End Channel Pair to Pair Unbalance Ad Hoc Presentation

 

I meant that we continue to discuss after the time of the forma meeting. The formal meeting ends when there is not sufficient attendees or someone ask to finish on time, or most of the group agrees to continue, so after that time we can continue discussion whit out having decisions.

Yair

 

From: Jeff Heath [mailto:jheath@xxxxxxxxxx]
Sent: Wednesday, July 02, 2014 6:16 PM
To: Darshan, Yair; STDS-802-3-4PPOE@xxxxxxxxxxxxxxxxx
Subject: RE: [802.3_4PPOE] End to End Channel Pair to Pair Unbalance Ad Hoc Presentation

 

What do you mean by formal ad hoc meeting?

 

Regards,

 

Jeff Heath
Design Center Manager

Description: Linear Technology Corporation

 

 

paper:

402 East Carrillo Street, Suite D

 

Santa Barbara, California 93101

voice:

805.965.6400

fax:

805.965.1701

computer:

jheath@xxxxxxxxxx

 

www.linear.com

 

From: Darshan, Yair [mailto:YDarshan@xxxxxxxxxxxxx]
Sent: Wednesday, July 02, 2014 3:53 AM
To: Jeff Heath; STDS-802-3-4PPOE@xxxxxxxxxxxxxxxxx
Subject: RE: [802.3_4PPOE] End to End Channel Pair to Pair Unbalance Ad Hoc Presentation

 

Thanks Jeff.

I am working on this direction too and few others that we discuss after the formal 1 hour time of the adhoc meeting.

Yair

 

From: Jeff Heath [mailto:jheath@xxxxxxxxxx]
Sent: Tuesday, July 01, 2014 7:53 PM
To: STDS-802-3-4PPOE@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_4PPOE] End to End Channel Pair to Pair Unbalance Ad Hoc Presentation

 

Yair,

 

The entire principle of adding balanced resistance to test imbalanced channel resistance does not represent any real system.  PSE PI and PD PI will add imbalance in worst case analysis.  At the end of the day only full worst case analysis using all three components will give us the correct worst case maximum current

 

Regards,

 

Jeff Heath
Design Center Manager

Description: Linear Technology Corporation

 

 

paper:

402 East Carrillo Street, Suite D

 

Santa Barbara, California 93101

voice:

805.965.6400

fax:

805.965.1701

computer:

jheath@xxxxxxxxxx

 

www.linear.com