Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_4PPOE] Proposal for updating TBDs in channel baseline text from May 2014 for a motion during this meeting.

Hi Yair,

The first sentence might be confusing to the outside reader because logically it seems to state the following:
       Rdiff not > 100 milliOhms  -or-  Runb = 7.5%...  whichever is greater.
Where the user must compare milliOhms to a percentage to determine which is greater.

It would help clarify if presented as shown below:

The 4-pair operation requires that the channel meet at least one of the following: 
Resistance Difference < 100 mOhm 
Resistance Unbalance < 7.5%      



On 9/10/2014 3:00 PM, Darshan, Yair wrote:

Hi all,


As a result of our adhoc work and last discussions and after getting more feedback,

here is the updates proposed for the baseline text baseline text from May 2014 that we have approved.  

Please see attached and let me know if you are OK with it or you have any comments.




Darshan Yair


Power over HDBaseT Subcommittee

HDBaseT Alliance


Chief R&D Engineer

Analog Mixed Signal Group

Microsemi Corporation


1 Hanagar St., P.O. Box 7220
Neve Ne'eman Industrial Zone
Hod Hasharon 45421, Israel
Tel:  +972-9-775-5100, EXT 210.

Cell: +972-54-4893019
Fax: +972-9-775-5111


E-mail: <mailto:ydarshan@xxxxxxxxxxxxx>.