Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_4PPOE] Limiting Rpse_min

Hi all,


The maximum value of RPSE_min in Equation 145-15 is not limited currently and it should so it will be defined for practical numbers.

I found it during running calculations vs simulations of Icon-2P_unb when we selected Rpse_max when Rpse_min is given and connect the PSE to the test verification model in the spec.

When Rpse_min value has no maximum limit, we will start to see in after specific Rpse_min value small differences between the spec and the calculated values which we need to address.


Please see full analysis and simple proposed remedy.

Appreciate your inputs.






Darshan Yair

Chief R&D Engineer

Analog Mixed Signal Group

Microsemi Corporation


1 Hanagar St., P.O. Box 7220
Neve Ne'eman Industrial Zone
Hod Hasharon 45421, Israel
Tel:  +972-9-775-5100, EXT 210.

Cell: +972-54-4893019
Fax: +972-9-775-5111


E-mail: <mailto:ydarshan@xxxxxxxxxxxxx>.  



Attachment: darshan_02_0917_Limiting the value of Rpse_min and Rpd_min.pdf
Description: darshan_02_0917_Limiting the value of Rpse_min and Rpd_min.pdf