Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_GEPOF] FTTH Council market study



Dear all,

in my opinion, the main advantages of POF in the HN vs CAT 5e are:
    + For "in-wall" installation: POF can be installed in the mains conduit. vs CAT 5e can-not.
        - By law, copper data can not share the same conduit than the mains. (Segurity and EMI / EMC reasons)
        - Introducing POF in the conduit is straight forward, where CAT-5e is typically very difficult. ( flexibility and bending handling )
    + For "out-wall" installation, POF is thinner and easier to hide. ( Under the carpet, etc)
    + Easiness of installation:
        - Connection a POF bare fiber connector is 10 s vs CAT 5-e 5-10 min (RJ-45 crimping).
        - POF and Installation and connection can be done by a lower qualified person compared with CAT-5e. ( Even grandma can do it ;-) )

Regarding costs, POF bill of materials should be similar than copper to be competitive. I do not thing that has to be lower than copper, thanks to the operative cost reduction of POF vs copper.

Regards

Carlos Pardo
       

El 22/09/14 15:59, Dai, Eugene (CCI-Atlanta) escribió:
Hi Serizawa: Thanks for the comments. If we talk about office and /or business applications we certainly have to deal with the comparison of POF with CAT5 cables.  However, CAT 5 cable is not really used home networking although we all have short CAT 5 cables here and there at home. The majority of home networking use either coax or Wifi today. With G.hn products roll out, twisted pair phone line may be used for home networking.  If successful in home networking, POF could be extended to office/business applications.  All that time the points you brought out have to be addressed. If GEPOF PHY is lower in cost than 1000BASET PHY,  than it could compete with CAT5 for that market.

This remind me that if we that if we want to bring out the office application for POF, we had a brief discussions at Ottawa meeting, we may have to deal with POF and CAT5 comparison as you suggested. 

Regards,
Eugene 

________________________________________
From: naoshi.serizawa@xxxxxxxxxxxxx <naoshi.serizawa@xxxxxxxxxxxxx>
Sent: Monday, September 22, 2014 1:18 AM
To: STDS-802-3-GEPOF@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_GEPOF] FTTH Council market study

Hello Carlos & Eugene,

Thank you for sending information for the FTTH. Also, I looked a material that Eugene presented at Ottawa.
Those information themselves are very good to explain about use cases of GEPOF.  However it can be substituted for CAT 5/6 cables to those applications and it seems to be that they are not explaining about the necessity of GEPOF. In order to convince opponents, we should show them strong impacts and advantages of GEPOF technology. Otherwise, we can't answer if they ask us about it.
We should clarify the advantages / cons. against to CAT5/6 cables (cost, weight, relatability, supply chain, max length, workability, etc).

I am pleased you to take in to account the above situations.

Kind regards,
N Serizawa


-----Original Message-----
From: Hayato Yuki [mailto:hayato-yuuki@xxxxxxxxxxxxxx]
Sent: Monday, September 22, 2014 8:23 AM
To: STDS-802-3-GEPOF@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_GEPOF] FTTH Council market study

Hello Carlos-san,  Cc Menbers,

I understand that the European home network market has been growing more and more.

However, we should explain that the POF-cable network is superior to the category-cable network for home networking.

Thanks,

Yuki@Sumitomo




Dear all,

please find in this public link:
http://www.ftthcouncil.eu/documents/Webinars/2014/Webinar_27May2014.pdf
the latest information of the European FTTH-Council on FTTH deployment.

The FTTH deployment can be used as an indicator of the TAM  for the
gigabit Home Networking market.
The FTTH deployment speed in Europe is around 5 Million houses per year.

In parallel with this values, we may add TAM values from ADSL/VDSL
deployment, and new/refurbish homes.

Best Regards

Carlos