Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_NGAUTO] 10SPE (802.3cg) adhoc - s-Parameter model for multidrop channel

Title: Default Disclaimer Daimler AG

Dear all,

Dear Georg,


I have prepared a graph from the multidrop channel model as discussed in the ad hoc call.

I have put this together in a few slides.


Please let me know if you need further input.

If you have done any simulations you can share your channel data/graphs as well, so I can double check.


Best regards,



Von: Stefan Buntz [mailto:stefan.buntz@xxxxxxxxxxx]
Gesendet: Montag, 24. April 2017 11:57
An: STDS-802-3-NGAUTO@xxxxxxxxxxxxxxxxx
Betreff: [802.3_NGAUTO] AW: 10SPE (802.3cg) adhoc agenda for wednesday and website updated


Dear all,

dear Georg,


Just to clarify, because I am not sure, if I can participate on Wednesday ad hoc call:


I have provided a sample of an Touchstone file, representing the max_linear topology from, slide 4.


This is just to “test” if this data is a) readable and b) helpful for further investigations from semiconductor vendor side.


Here is the Touchstone file:

The example is an S16p touchstone file. It represents the MAX passive linear topology shown in earlier presentations, the topology is simulated in a 50ohm system (each wire is terminated with 50ohms in the simulation). The differential ports are always two adjacent ports of the simulation (e.g. "1" and "2" are together the differential port of the head node, 3 and 4 are the ports of the first leave node and so on...) Question to the group: is such data helpful to simulate further? If so, I will try to provide multiple topology examples.






Default Disclaimer Daimler AG
If you are not the addressee, please inform us immediately that you have received this e-mail by mistake, and delete it. We thank you for your support.

Attachment: buntz_10SPE_06_0502.pdf
Description: buntz_10SPE_06_0502.pdf