Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_NGBASET] Survey Monkey Straw Poll for 5G over Cat5e objective language



Hi Folks,

 

As discussed in the AdHoc teleconference today, your esteemed chair and I would like to keep making progress in firming up objectives. To get this project moving fast, we really need to get our objectives nailed in the Interim in January, and that’s not very far away.

 

We want to get a sense of where the group is in relation to what is (almost certainly) our most controversial potential objective “What objective text should we use to address support for 5Gb/s on four-pair Class D (Cat5e)?" (see slide 4 in the deck at this link)

 

We will use “Survey Monkey” for this (thanks to Mark Nowell for this idea), and I’ve set up a poll as “Chicago Rules” (vote for all  options that make sense to you). The poll is at https://www.surveymonkey.com/s/X99DC8N

 

I would like to encourage everyone to read the material at the adhoc web page (link) and also the CFI deck (link), and then give us your best response based on where you are right now.

 

The straw poll (link) asks the following (and thanks to George Zimmerman for providing some nice explanatory text).

1. This is a straw poll to get the sense of the group on the question "What objective text should we use to address support for 5Gb/s on four-pair Class D (Cat5e)? ". 

The full "potential objectives" deck is at link. Choose all acceptable options!

Summary of options

·         No Opinion" , This feels like an abstain, or maybe "not enough information to form an opinion yet".

·         "None, should not be an objective or no objective needed” : This means we retain the proposed objective for support of 5G over Cat 6/Class E (with the appropriate augmentation), but don’t add anything mentioning Cat5e/Class D. If a Class D link segment meets the requirements, it would still be supported, but Cat5e/Class D would not be explicitly mentioned in the objectives for the 5Gbps rate.

·         Up to at least 100m on Cat 6 and Up to 100m on Cat 5e”:  This means that we retain the proposed Cat 6/Class E objective, with specifications that support 100m E (with the appropriate augmentation), and add to it, an explicit reference for Cat5e/Class D support, but with a less aggressive posture – “Up to 100m” means the group may not reach the full 100m, and it is on a best-effort basis, but some distance would be supported.

·         Up to at least 100m on Cat 5e”:  In this case we would delete the proposed objective for support of 5G over Cat 6/Class E, relying on the backwards compatibility of cabling (Cat 6 links meet or exceed all Cat5e requirements). Links from minimum length to 4 connector channels of 100m over Cat5e would be supported at the 5Gbps rate (with appropriate augmentation) at least in those configurations covered by the ‘augmentation’.

 

I plan to leave this survey open until the end of Sunday 12/22/14 (AOE). I will then tally the results and report back to the group.

 

Regards

Peter

 

Peter Jones 

NGEABT Study Group Architecture Ad Hoc Chair