Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_NGBASET] FW: [STDS-802-3] +++ 802.3 WG 2nd RECIRCULATION BALLOT: IEEE P802.3bq 40GBASE-T D2.2 ballot



Reminder!  P802.3bq ballot closes this Sunday.
Thanks,
Dave


-----Original Message-----
From: Law, David [mailto:dlaw@xxxxxx] 
Sent: Saturday, August 15, 2015 4:50 AM
To: STDS-802-3@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-3] +++ 802.3 WG 2nd RECIRCULATION BALLOT: IEEE P802.3bq 40GBASE-T D2.2 ballot

Dear Colleagues,

This is the announcement of the electronic IEEE 802.3 Working Group 2nd recirculation ballot on the amendment IEEE P802.3bq 40GBASE-T. Remember that voting, as well as attendance, is a requirement to maintain your IEEE 802.3 member (voter) status. Instructions for accessing the draft, casting your ballot and submitting comments follow this announcement. The ballot group for this draft is the IEEE 802.3 voting membership as of Friday 13th March 2015.

Because this is a recirculation ballot, YOU ONLY NEED TO CAST A BALLOT IF YOU WISH TO CHANGE YOUR VOTE FROM THAT WHICH WAS RECORDED ON THE INITIAL BALLOT OR LAST RECIRCULATION. If you voted previously and your vote has not changed, the last ballot cast will be carried over to this ballot and you do not need to cast a new ballot.

BALLOT SCOPE:
During this IEEE 802.3 Working Group 2nd recirculation ballot, the scope of the ballot is the substantive changes between IEEE P802.3bq/D2.2 and IEEE P802.3bq/D2.1 and the unsatisfied negative comments from the 1st recirculation ballot.

FIVE CRITERIA:
One of the responsibilities as a balloter is to ensure that draft is consistent with the 5 Criteria responses which are available at <http://ieee802.org/3/bq/5Criteria.pdf>. An Approve vote indicates your agreement that the draft is consistent with the 5 Criteria responses.

BALLOT OPEN:
Sunday 16th August 2015

BALLOT CLOSE:
Sunday 30th August 2015 23:59 AOE

The Project Authorization Request for this Amendment is available at <http://ieee802.org/3/bq/P802.3bq.pdf> and includes the following:

TITLE:
IEEE Standard for Ethernet Amendment: Physical Layer and Management Parameters for 40 Gb/s Operation, Type 40GBASE-T

SCOPE OF PROJECT:
Specify a Physical Layer (PHY) for operation at 40 Gb/s on balanced twisted-pair copper cabling, using existing Media Access Control, and with extensions to the appropriate physical layer management parameters.

NEED FOR THE PROJECT:
With continued growth of server capabilities, network and Internet traffic, datacenters continue to require higher data rates for equipment interconnections. The IEEE 802.3 BASE-T family of technologies allows for seamless upgrade between older rates and newer rates. Currently, IEEE Std 802.3 does not support 40 Gb/s BASE-T operation. There is a market need for a low cost 40 Gb/s BASE-T solution with auto-negotiation capability for datacenter applications.

Thank you for your participation in this ballot and careful review of the draft.

David Law
Chair, IEEE 802.3 Ethernet Working Group
Phone: +44 1631 563729
Email: david_law@xxxxxxxx 

David Chalupsky
Chair, IEEE P802.3bq 40GBASE-T Task Force
Phone: +1 503 264 1777
Email: david.chalupsky@xxxxxxxxx

----------------------------------------------------------------

INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3bq draft D2.2

Instructions for accessing the ballot documents, casting your ballot and submitting comments follow.

HOW TO ACCESS THE DRAFT
The draft is posted for your review for balloting purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights.

The IEEE P802.3bq 40GBASE-T draft D2.2 may be downloaded from:

URL: <http://www.ieee802.org/3/bq/private/8023bq_D2p2.pdf>
<Please use the IEEE 802.3 or IEEE P802.3bq username>
<Please use the IEEE 802.3 or IEEE P802.3bq password>
Please submit comments against the above draft.

A comparison file between IEEE P802.3bq 40GBASE-T draft D2.1 and D2.2 is also provided to both focus and ease your review. Please DO NOT comment on this comparison document. This draft may be downloaded from:

<http://www.ieee802.org/3/bq/private/8023bq_D2p2_CMP.pdf>

Please DO NOT submit comments against the above document.

Unsatisfied negative comments, and their dispositions, from the 1st recirculation ballot may be downloaded from:

<http://ieee802.org/3/bq/comments/p802.3bq_d2.0-d2.1_unsatisfied.pdf>

All comments, and their dispositions, from the 1st recirculation ballot may be downloaded from:

<http://ieee802.org/3/bq/comments/p802.3bq_d2.1_final_Clause.pdf>

These documents are posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it may be downloaded for free downloading from Adobe from:

<http://www.adobe.com/prodindex/acrobat/readstep.html>


HOW TO CAST YOUR BALLOT

To assure your ballot is counted, please:

1) Send your ballot to: stds-802-3-ballot@xxxxxxxx

2) Paste the following line into the subject field:

IEEE P802.3bq 40GBASE-T D2.2 ballot

This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3bq%2040GBASE-T%20D2.2%20ballot>

3) Paste into the message body and complete the ballot form below:

-----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

IEEE P802.3bq 40GBASE-T D2.2 ballot

Your Name:___________________________
 
 
 ___ APPROVE ALL WITHOUT COMMENT
 
 ___ APPROVE ALL WITH COMMENTS on SOME
       (All comments are non-binding)
 
 ___ DISAPPROVE
       (Some or all comments are binding; a voter must attach specific comments for remedy)
 
 ___ ABSTAIN, Lack of Expertise
 
 ___ ABSTAIN, Lack of Time
 
 
-----------------------end ballot form--------------------

HOW TO SUBMIT COMMENTS

Acceptable comment types:

E = Editorial
ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) T = Technical TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member)

1. Prepare your comments in one of the following two ways:

a. You are STRONGLY REQUESTED to use the comment tool at the URL:

<http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool.zip>

To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is:

Comment_Tool_Generic_Solution.exe

b. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail.

PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use the comment tool above if possible.
 
 ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

 CommentID: (Leave Blank)
 CommenterName:
 CommenterEmail:
 CommenterPhone:
 CommenterCellPhone:
 CommenterCompany:
 Clause:
 Subclause:
 Page:
 Line:
 CommentType: (E, ER, T, or TR)
 Comment:
 CommentEnd:
 SuggestedRemedy:
 RemedyEnd:

 --------------------end comment template------------------

2. Send your comments to: stds-802-3-ballot@xxxxxxxx and paste into the subject line:

IEEE P802.3bq 40GBASE-T D2.2 comments

This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3bq%2040GBASE-T%20D2.2%20comments>