Re: [10GBASE-CX4] PAR Proposal - Please Read and Review ASAP
Dan,
The PAR you sent has the "Name of Working Group (WG): Bob Grow" ?
Also, the Scope section (12) and Purpose section (13) are not filled in?
Larry R.
"DOVE,DANIEL J (HP-Roseville,ex1)" wrote:
> Hello All,
>
> We have a bit of a SNAFU regarding the PAR document.
>
> When Bob Grow presented it at the December Meeting, it was filled out
> as an HTML form. During the save process, the contents of the form were
> lost.
> This is a bit problematic as we intend to submit the PAR to the IEEE 802
> exec and want to submit what has been presented.
>
> Because of this issue, Bob has regenerated the PAR document and I have
> posted it to the web site at...
>
> http://www.ieee802.org/3/10GBCX4/802-3akpar.pdf
>
> We are asking members of the Study Group to review and feed back any
> comments
> via this reflector. If there is anyone who took notes during the meeting
> that conflict with
> any content in the PAR document, please let us know. Please review the Scope
> and
> Objectives sections carefully. They are brief, but we want to ensure that
> they have
> been accurately reproduced from our presentation.
>
> The finalized PAR document will be submitted to the IEEE with the
> appropriate lead
> times, subject to confirmation at the February interim.
>
> Thanks for doing this quickly and thoroughly,
>
> Regards,
>
> Dan Dove
> Chair, 10GBASE-CX4 Study Group
> ======================================
> Principal Engineer, LAN PHY Technology
> System Architect, Workgroup Switching
> dan.dove@hp.com
> hp ProCurve Networking Business
> 8000 Foothills Blvd. MS 5555
> Roseville, CA 95747-5555
> Phone: 916 785 4187
> Fax : 916 785 1815
> ======================================