CONTENTS of *.zip file OM2_MC50_3X_tau1300_6_5Kb.zip 1. READ_ME_FIRST.txt This file (contents) See the IEEE 802.3aq LRM presentation abbott_1_0705.pdf at http://ieee802.org/3/aq/public/jul05/abbott_1_0705.pdf for an introduction. 2. OM2_MC50_3X_tau1300_6_5Kb.dat 5000 mode delays at 1300nm for installed base OM2 modeling (50um 500/500) creating using expanded set of 30,000 test fibers. This data set has the mode delays. It needs to be merged with the mode power distribution for the lasers/launch conditions being modeled. We are assuming that only the first 10 groups be given significant power, and that the outer two are considered attenuated. These mode delays approximate a manufacturing distribution, just as was done for the TIA simulations of OM3 fiber (850nm 10GbE 300m) described in JLT Vol. 21 May 2003 pp.1256-1275, and pp.1242-55. THE DISTRIBUTION INCLUDES FIBERS WHICH DO NOT MEET THE 500/500 SPEC and needs to be truncated using the data in file (3.) just below. 3. print_OFLBW_summary.dat Set of OFL850, OFL1300 corresponding to installed base OM2 model This data set is used to truncate the modeling results so that only fibers meeting the OFL 500/500 requirement are included. 4. PXG_50um_1300_26_12.dat Set mode power distributions for gaussian beams launched into 1% Delta 50um core radius fibers at 1um intervals from 0um to 25um. 26_12 refers to 26 radial positions and 12 mode groups supplied. Please sent questions/comments to John Abbott Corning Incorporated abbottjs@corning.com