"0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.1~113~12~ER~Update PICS COM2 from ""shall"" statement in 33.1.4.1, page 38, line 4: ""...DC loop resistance shall be 25 ohms or less.""~Update PICS COM2 ""Value/Comment"" to reflect updated text in 33.1.4.1 New text: ""DC loop resistance 25 ohms or less. Requirement satisfied by category 5e components (cables, cords, and conectors)"" ~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.1~113~12~ER~Missing PICS statement. Necessary due to the addition of clause 33.1.4.2 and the text ""...resistance unbalance shall be 3 % or less."" Page 38, line 18.~Add PICS Item Feature Subclause Value/Comment Status Support COM3 Resistance unbalance 33.1.4.2 3% or less M Yes[]~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~113~44~ER~Missing PICS statement. Necessary due to the addition of clause 33.2.4.6 and the text ""A Type 2 PSE shall assign a value of ‘2’..."" Page 49, line 34.~Insert PICS and renumber accordingly Item Feature Subclause Value/Comment Status Support PSE10 Mutual identification 33.2.4.6 Assign a value 2 M Yes[] complete: set_parameter_type ~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~113~46~ER~Missing PICS statement. Necessary due to the addition of clause 33.2.4.6 and the text ""..the PSE shall meet the PI electrical requirements..."" Page 49, line 37.~Insert PICS and renumber accordingly Item Feature Subclause Value/Comment Status Support PSE11 Type 2 PSE PI electrical 33.2.4.6 Meet Type 1 PSE PSET2:M Yes[] requirements when powering requirements or N/A[] Type 1 PD Type 2 PSE for Iport_max, ILIM, TLIM and PType.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~113~50~ER~Missing PICS statement. Necessary due to the additional text ""..The PSE shall present a non-valid PD detection signature..."" Page 53, line 3.~Insert PICS and renumber accordingly Item Feature Subclause Value/Comment Status Support PSE_X Non-Valid Detection 33.2.6 As defined in Table M Yes[] signature 33-15 when probed by another PSE.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~114~7~ER~The text on page 42 line 43 in 33.2.6 has been deleted from draft 3.0. ""The PSE shall exhibit Thevenin equivalence to one of the detection circuits shown in Figure 33–12 or Figure 33–13 in all detection states."" Therefore PICS PSE17 is now invalid.~Delete PICS statement PSE17 and renumber.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~114~32~E~Value/Comment Field: missing the ""1"" for ""Type 1 PSE"".~Add the ""1""~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.2~33.2.8~56~49~ER~Missing ""shall"". Text has been changed from draft 3.0 D3.0 text: Subsequent to successful detection, all Type 2 PSEs shall perform classification. D3.3 text: Subsequent to successful detection, all Type 2 PSEs perform classification using at least one of the following:~Insert ""shall"" ...all Type 2 PSEs shall perform classification using... If ""shall"" is not inserted delete PICS PSE26 and renumber. ~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~114~37~ER~Text in 33.2.8, page 57, line 27 has changed from draft 3.0 therefore PICS PSE27 needs to be updated.~Update Value/Comment field in PSE27 to: ""Return to IDLE state or assign to Class 0."" Update Subclause reference in PICS PSE27 to 33.2.8 (drop .1) ~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~114~39~ER~Insert PICS after current PSE27. Text in 33.2.8, page 57, line 27 has changed from draft 3.0 therefore another PICS needs to added after the current ""Default classification"" feature. ~Insert PICS (after current PSE27, default classfication for Type 1 PSEs) and renumber accordingly Item Feature Subclause Value/Comment Status Support PSE_X Default classification 33.2.8 Return to IDLE state PSET2:M Yes[] N/A[]~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~115~6~ER~Text in 33.2.8.1, page 57, line 46 has changed from D3.0. A shall has been removed. D.3.0 Text: a Type 2 PSE shall assume it is powering a Type 2 PD. D 3.1 Text: a Type 2 PSE treats the PD as a Type 2 PD but may provide Class 0 power until mutual identification is complete.~Delete PICS PSE34 or Update the text in 33.2.8.1 to say ""a Type 2 PSE shall treat the PD..."" and leave the current PICS PSE34 in the draft. ~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~115~10~ER~Text in 33.2.8.1, page 57, line 48 has changed from D3.0. PICS PSE35 needs updating.~Update Value/Comment field in PSE35 to: Return to IDLE state or assign PD to Class 0 if Iclass is greater than or equal to IClass_LIM.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~115~12~ER~Text in 33.2.8.1, page 57, line 48 has changed from D3.0. A PICS needs to be added after the current PSE35.~Insert PICS (after current PSE35) and renumber accordingly Item Feature Subclause Value/Comment Status Support PSE_X Classification default 33.2.8.1 Return to IDLE state PSET2:M Yes[] for 1-Event Physical Layer N/A[] classification~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~115~37~ER~Text in 33.2.8.2, page 58, line 30, has changed from draft 3.0. PICS PSE46 needs updating.~Change Value/Comment field in PICS PSD46 to the following: ""Return to IDLE state if IClass is greater than or equal to IClass_LIM.""~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~115~51~ER~Text in 33.2.8.2, page 58, line37, has been changed from D3.0, need to add a PICS as a result of this text. "" it shall maintain the PI voltage at VReset for a period of at least TReset min before starting a new detection cycle.""~Insert PICS (after current PSE51) and renumber accordingly Item Feature Subclause Value/Comment Status Support PSE_X Return to IDLE State 33.2.8.2 Vreset for a period 2EPLC:M Yes[] PI Voltage of at least TReset N/A[]~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~116~4~ER~Text has changed from D3.0 to D3.3 in 33.2.9, page 60, line3. Text struck from D3.0 ""When a Type 2 PSE powers a Type 1 PD, the PSE shall meet the electrical requirements..."" As a result PICS PSE53 is not needed.~Delete PICS PSE53 and renumber accordingly~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~116~10~ER~Text has changed from D3.0 to D3.3 in 33.2.9.1, page 61, line 41. The text struck from D3.0 ""The voltage potential shall be measured between any conductor..."" As a result PICS PSE55 is not needed.~Delete PICS PSE55 and renumber accordingly~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~116~30~ER~Text in 33.2.9.5, page 62, line 19, has been deleted from draft 3.0. Deleted text from Draft 3.0: ""the minimum value for IPort_max in Table 33–9 shall be (PPort / VPort)."" PICS PSE61 is no longer valid.~Delete PICS PSE61~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~116~33~E~Equation number in 33.2.9.5, page 62, line 25 has changed from draft 3.0.~Change equation number in the Value/Comment field for PICS PSE62 to 33-3.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~116~40~E~Equation number has changed to 33-5 for IPSEUT in 33.2.9.8~Update equation number in PICS PSE64 to 33-5.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~116~40~E~Figure number has changed in the text, 33.2.9.8, page 64, figure 33-15. PICS PSE64 reqires an update~Change figure number in PICS PSE64 to 33-15.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~116~54~ER~New PICS required due to the new text in 33.2.9.12, page 65, line 54. ""Type 2 Endpoint PSEs shall meet the requirements of 25.4.4a in the presence of (Iunb / 2).""~Insert PICS (after current PSE69) and renumber accordingly Item Feature Subclause Value/Comment Status Support PSE_X Current unbalance for 33.2.9.12 Meet requirements of PSET2:M Yes[] type 2 PSE 25.4.4a in presence N/A[] of (Iunb/2).~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~117~3~ER~TOff in Value/Comment field in PICS PSE70 is incorrect, it should be Tpon. See text in 33.2.9.13, page 66, line 3.~Change TOff to Tpon.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~117~17~ER~Insert PICS after PSE72 Text in 33.2.11.1, page 66, line 40 added since last PICS review. ""The PSE shall monitor either the DC MPS component, the AC MPS component, or both.""~Insert PICS (after current PSE72) and renumber accordingly Item Feature Subclause Value/Comment Status Support PSE_X MPS monitoring 33.2.11.1 DC MPS or AC MPS M Yes[] requirement components or both ~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~117~24~E~Line 24 and Line 26. The terms IMin2 and IMin1 are used throughout the text however only IMin is defined in Table 33-11. I beleive these are editorial errors.~Search doucment and replace all instances if IMin1 and IMin2 with Imin. ~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~117~24~ER~Text in 33.2.11.1.2, page 67, line 6 has changed from D3.0, PICS PSE77 requires updating.~Replace Value/Comment field with the following: ""IPort is greater than or equal to IMin max for a minimum of TMPS as specified in Table 33-11.""~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.2~117~26~ER~Text in 33.2.11.1.2, page 67, line 7 has changed from D3.0, PICS PSE78 requires updating.~Replace Value/Comment field with the following: ""IPort is less than or equal to IMin min as specified in Table 33-11.""~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.3~118~20~ER~Need to insert a PICS for current unbalance requirements for PD due to the new text in 33.3.2, page 70, line 10. ""Type 2 PDs shall meet the requirements of 25.4.4a in the presence of (Iunb / 2).""~Insert PICS (after current PSE69) and renumber accordingly Item Feature Subclause Value/Comment Status Support PSE_X Current unbalance for 33.3.2 Meet requirements of PDT2:M Yes[] type 2 PD 25.4.4a in presence N/A[] of (Iunb/2).~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.3~118~26~ER~PICS PD8 can be deleted. The text from D3.0, 33.3.4 has changed and the following text was deleted making PD8 no longer valid. ""...while it is in a state where it will not accept power via the PI.""~Delete PICS PD8. ~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.3~118~41~ER~PICS PD13 ""shall"" removed from text, 33.3.5, page 74, line 44. Either the word ""shall"" is reinserted into the text or remove the PICS statement.~Insert the word ""shall"" in 33.3.5, page 74, line 44. ""Type 2 PDs shall implement both...""~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.3~119~7~E~Table reference in PICS PD18 is incorrect. Tables were renumbered.~Change table reference to 33-17 in Value/Comment field.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.3~119~12~ER~Text in 33.3.5.2.1 has changed, need to update PICS PD20 to reflect the change in text.~Replace PICS PD20 fields as follows: Feature: Mark event current and 2-Event class signature Value/Comment: Draw IMark (defined in Table 33-17) and present a non-valid detection signature (defined in Table 33-15).~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.3~119~19~ER~The text supporting PICS PD22 has been removed since D3.0 and clauses renumbered. Text in D3.0, 33.3.5.2.2, page 65, line 3: ""A PD implementing 2-Event class signature shall reset its pse_power_type state variable to 1 when the voltage at the PI is less than or equal to VReset max as defined in Table 33–16.""~Delete PICS PD20 and renumber.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.3~119~27~E~PICS PD24 is specific to Type 2 PDs therefore the Status field needs to indicate as such.~Change ""Status"" field from ""M"" to ""PDT2:M""~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.3~119~43~ER~Text has changed from D3.0 making PICS PD30 invalid. Text from D3.0, 33.3.7.2, page 67, line 33 that created the PICS: ""The specification for PPort in Table 33–17 shall apply for the input power averaged over 1 second."" Current text in 33.3.7.2, page 78, line 6 does not have a shall statement. Either delete the PICS statement or insert the word shall in the text.~Delete PICS PD30.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.3~119~53~ER~Text in 33.3.7.3, page 78, line 33 references ""Tdelay min"", not ""TInrush max"" as stated in the PICS PD32.~Change ""TInrush max"" to ""Tdelay min"" in the Value/Comment field of PICS PD32.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.3~120~7~ER~Text has changed in 33.3.7.3 from D3.0. D3.0 text: At any static voltage at the PI, and any PD operating condition, the peak current shall not exceed PPort max for more than 50 ms maximum and 5% duty cycle maximum. D3.3 text: At any static voltage at the PI, and any PD operating condition, the peak power shall not exceed PClass_PD max for more than 50 ms maximum and 5% duty cycle maximum. ~Change PICS PD34 as follows: Change the ""Feature"" field to: ""Peak power"" Change the ""Value/Comment"" to: ""Not to exceed PClass_PD max for more than 50 ms max and 5 % duty cycle max""~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.3~120~12~E~PICS PD36 and PD37, equations were renumbered in the text.~Change 33-8 on line 12 to 33-9 Change 33-9 on line 14 to 33-10~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.3~120~22~ER~Text supporting PICS PD40 has been deleted from D3.0 to D3.3. D3.0 Text, in 33.3.7.5, page 69, line 37: ""The PD shall operate below the “PD upperbound template,” defined in 33.2.9.9 and Figure 33–14, during transient conditions lasting greater than 10 ms.""~Delete PICS PD40.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.3~120~25~E~Text supporting PICS PD41, sublcause 33.3.7.6 has been completely rewirtten from D3.0 to D3.3. Updateing the Feature field in PICS PD41 makes the PICS statement more clear.~Replace PICS PD41 ""Feature"" field as follows: ""Behavior during transients at the PSE PI"" ~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.4~121~47~ER~Value/Comment field: for 10Mb/s PHYs the text in 33.4.3, page 84, line 30 states the freqency range is up to 100 MHz, not 20 MHz as stated in the PICS. D3.0 also stated up to 100MHz.~Change 20 Mhz to 100MHz in PICS EL13.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.4~122~10~ER~Text supporting PICS EL15 has been struck since D3.0. D3.0 text, 33.4.4, page 74, line45: ""The magnitude of the common-mode AC voltage shall not exceed 50 mV peak-to-peak measured at all other PIs.""~Delete PICS EL15.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.5~122~48~ER~Insert PICS due to new text in 33.4.8, page 87, line 51.~Insert new PICS after PSEEL3 and renumber. Item Feature Subclause Value/Comment Status Support PSEEL_X Channel unbalance 33.4.8 Less than or equal MIDA: Yes[] current for Type 2 to Type 1 Iunb. M N/A[] Midspans that support 100BASE-TX~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.4~~~ER~Insert PICS due to new text in 33.4.8, page 88, line 1.~Insert new PICS after EL20. Item Feature Subclause Value/Comment Status Support EL21 Channel unbalance 33.4.8 Meet requirements of M Yes[] current for Type 2 clause 25 in presence N/A[] Enpoint PSE and PDs (Iunb/2) that support 100BASE-TX~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.5~123~36~ER~Equation and equation number have changed in the text, 33.4.9.2, page 91, line 23. PICS PSEEL13 requires an update.~Replace PICS PSEEL13 Value/Comment field as follows: ""Exceed transfer function gain expressed in equation 33–19 from 0.1 MHz to 1 MHz at the pins of the PI used as 100BASE-TX transmit pins""~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.5~123~41~ER~Text and subclause reference 33.4.9.2.1, page 91, line 29 has changed from D3.0 (33.4.9.2). PICS PSEEL14 needs to be updated.~Replace existing PSEEL14 fields as follows: Subclause: 33.4.9.2.1 Status: MIDA:M~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.5~123~40~ER~Insert PICS statement. Additional text in 33.4.9.2, page 91, line 29 defines another PICS.~Insert new PICS after existing PSEEL13 and renumber. Item Feature Subclause Value/Comment Status Support PSEEL_X Alternative A Midspan 33.4.9.2 Between 0 mA and MIDA:M Yes[] DC bias current (Ibias) (Iunb / 2) mA defined N/A[] in Table 33-11~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.5~123~44~ER~Insert PICS: 33.4.9.2.1, page 91, line 38 defines another PICS. Insert PICS statement.~Insert new PICS after existing PSEEL14 and renumber. Item Feature Subclause Value/Comment Status Support PSEEL_X Alternative A Midspan 33.4.9.2.1 From output MIDA:M Yes[] transfer funcion termination to the N/A[] measurement Midspan PSE input~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.5~122~46~ER~Insert a PICS specific to the PSE to be consistent with a similar PICS specific to the PD (PDEL1).~Insert new PICS after existing PSEEL2 and renumber. Item Feature Subclause Value/Comment Status Support PSEEL_X PSE common-mode test 33.4.4 The PIs that require M Yes[] requirement power shall be N/A[] terminated as illustrated in Figure 33–24~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.7~124~2~E~Subclauses 33.8.3.7 and 33.8.3.8 are not in sequence with the rest of the PICS in relation to the clause numbers they reference (33.7...). Suggest they be moved to follow 33.8.3.10 which reference 33.6... and renumber the clauses as necessary.~Move 33.8.3.7 and 33.8.3.8 in order after 33.8.3.10 and renumber. 33.8.3.9 becomes 33.8.3.7 Management function requirements 33.8.3.10 becomes 33.8.3.8 Data Link Layer classification requirements 33.8.3.7 becomes 33.8.3.9 Environmental spec... to PSEs and PDs 33.8.3.8 becomes 33.8.3.10 Evironmental spec... to the PSE~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.9~125~41~E~Subclause 33.5.1.2.1 now reserves 2 bits instead of 1 bit (change from D3.0 to D3.3). Need to update PICS MF20.~Change the ""Feature"" to read: ""Reserved bits (12.15:14)""~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.9~126~15~ER~Subclause reference is incorrect and the state name is not quite correct. Update.~Change the fields in MF27 as follows. Sublcause: 33.5.1.2.6 Value/Comment: Replace ERROR_DELAY with ERROR_DELAY_SHORT~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.10~127~8~ER~Insert new PICS DLL1 and renumber as necessary. Text in 33.6, page 97, line13 defines a new PICS.~Insert new PICS DLL1 and renumber. Item Feature Subclause Value/Comment Status Support DLL1 Reserved fields in 33.6 Contain zero and M Yes[] DTE Power via MDI reserved fields in N/A[] TLVs received TLVs ignored~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.10~127~17~ER~Text supporting PICS DLL4, DLL5 and DLL6 has been changed since D3.0 (33.7.1 and 33.7.2). New text in current draft 33.6.1 and 33.6.2 cannot define the current PICS. Delete them.~Remove PICS DLL4, DLL5 and DLL6 and renumber.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.10~127~29~ER~PICS DLL8 Value/Commnet field requires changing. Text in 33.6.2.1.1, page 98, line 35 defines the change.~Change Value/Comment field to read: ""Set according to Table 33-23.""~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.10~127~46~ER~Value/Comment field requires an update. Text in 33.6.2.1.3, page 98, line 52 has changed.~Change Value/Comment field to read: ""Set to PD priority PSE advertises to assign to the PD"" ~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.10~127~50~E~Table number in text has changed to 33-24 (page 99).~Change table reference in Value/Comment field to 33-24. ~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.10~127~52~ER~Text has been deleted since D3.0, PICS DLL14 no longer defined in the current text. Delete the PICS statement. D3.0 text that supported the PICS. 33.7.2.3 Actual power type/source/priority The actual power type/source/priority field shall contain a bit-map of the actual power type, source, and priority defined in Table 33–22.~Delete current PICS DLL14.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.10~127~52~ER~Insert a new PICS DLL14 after the current DLL13. New text in 33.6.2.3, page 99, line 25 defines the PICS.~Insert new PICS after the current DLL13 and renumber. Item Feature Subclause Value/Comment Status Support DLL_X PSE allocated power 33.6.2.3 Contains current DLLC:M Yes[] value allocated power defined in Table 33-25~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.10~128~6~ER~Text in 33.6.5 has been changed since D3.0. Delete the current DLL15 PICS statement and insert new PICS statements to be defined in additional comments. Current text cannot support DLL15 PICS.~Delete PICS DLL15.~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.10~128~6~ER~Insert new PICS statement as a result of the significant changes to the text in 33.6.5 since D3.0. (1 of 5)~Insert before current PICS DLL16 Item Feature Subclause Value/Comment Status Support DLL_X Type 2 PSE LLDPDU 33.6.5 Within 10 seconds DLLC:M Yes[] transmission of DLLC being enabled N/A[] as indicated by the variable pse_dll_enabbled~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.10~128~6~ER~Insert new PICS statement as a result of the significant changes to the text in 33.6.5 since D3.0. (2 of 5)~Insert before current PICS DLL16 Item Feature Subclause Value/Comment Status Support DLL_X Type 1 PSE LLDPDU 33.6.5 When PSE DLLC engine DLLC:M Yes[] transmission is ready as indicated N/A[] by the variable pse_dll_ready~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.10~128~6~ER~Insert new PICS statement as a result of the significant changes to the text in 33.6.5 since D3.0. (3 of 5)~Insert before current PICS DLL16 Item Feature Subclause Value/Comment Status Support DLL_X Set state variable 33.6.5 Within 5 minutes DLLC:M Yes[] pd_dll_ready of DLLC being enabled N/A[] as indicated by the variable pd_dll_enabled~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.10~128~6~ER~Insert new PICS statement as a result of the significant changes to the text in 33.6.5 since D3.0. (4 of 5)~Insert before current PICS DLL16 Item Feature Subclause Value/Comment Status Support DLL_X PSE transmission 33.6.5 Within 10 seconds DLLC:M Yes[] of an LLDPDU during of receipt of an N/A[] normal operation LLDPDU with a different ""PD requested power value""~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.3.10~128~6~ER~Insert new PICS statement as a result of the significant changes to the text in 33.6.5 since D3.0. (5 of 5)~Insert before current PICS DLL16 Item Feature Subclause Value/Comment Status Support DLL_X PD transmission 33.6.5 Within 10 seconds DLLC:M Yes[] of an LLDPDU during of receipt of an N/A[] normal operation LLDPDU with a different ""PSE allocated power value""~~X~O" "0~Nadeau, Gerard~grn@iol.unh.edu~603-862-0166~~UNH-IOL~33.8~33.8.2.4~112~11~E~Nowhere in the PICS are the ""Items"" *END, *ENDA and *ENDB used. They were most likely defined but never needed when drafting the PICS.~Delete the ""Items"" *END, *ENDA and *ENDB~~X~O"