Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: [802.3_MAINT] Draft D1.0 is now available



 

Jeff,

The plan (as reflected in our project objectives) is to
update the modules to include 802.3an (10GBASE-T), 802.3ap
(Backplane), 802.3aq (LRM) and 802.3as (frame format extensions).

The updates needed for 802.3av, 802.3at, 802.3ba and 802.3az 
may be performed in a future amendment, which will likely
be numbered 802.3.1a. 

We had to put some boundary on the scope of the initial project.
The project objectives were approved at the November, 2008 plenary.

I welcome your offer of assistance. Once we get the modules updated
for .3an, .3ap, .3aq and .3as, it would be very helpful if you
proposed the updates for .3av so that they will be ready to go
when .3.1a starts up.

Howard

-----Original Message-----
From: Jeff Mandin [mailto:Jeff_Mandin@xxxxxxxxxxxxxx] 
Sent: Sunday, September 13, 2009 7:08 AM
To: Howard Frazier
Cc: STDS-802-3-MAINT@xxxxxxxxxxxxxxxxx
Subject: RE: [802.3_MAINT] Draft D1.0 is now available

Howard hi,

1.   It looks like you and John Hawkins have done a terrific job at
integrating all this disparate material.

2.   The MIB should reflect 802.3av at some point.  Specifically:

    * Clause 10 should be updated to reflect 10G-EPON.  Primarily this
means updating the terminology and clause references.  However there
might be some substantive changes also.  I can investigate this and
provide a contribution for the Task Force review phase - provided that
it is in fact within the scope of the current MIB project.

    *  Has the MIB Task Force discussed updates to the media types in
the IANA-maintained MIB?   Eventually, the following PMD types from
802.3av should be reflected by MAU types added to IANAifMauTypeListBits:


	10GBASE-PR-U1
	10/1GBASE-PRX-U3
	10/1GBASE-PRX-U2
	10/1GBASE-PRX-U1
	10GBASE-PR-D3
	10GBASE-PR-D2
	10GBASE-PR-D1
	10/1GBASE-PRX-D3
	10/1GBASE-PRX-D2
	10/1GBASE-PRX-D1 


Regards,

- Jeff Mandin
PMC-Sierra 

-----Original Message-----
From: owner-stds-802-3-maint@xxxxxxxx
[mailto:owner-stds-802-3-maint@xxxxxxxx] On Behalf Of Howard Frazier
Sent: Saturday, September 12, 2009 3:31 AM
To: STDS-802-3-MAINT@xxxxxxxxxxxxxxxxx
Subject: [802.3_MAINT] Draft D1.0 is now available

Dear Members of the IEEE 802.3.1 MIB Task Force, and the IEEE 802.3
Maintenance Task Force,

IEEE P802.3.1/D1.0 Draft Standard for Management Information Base (MIB)
definitions for Ethernet

has been posted to the IEEE 802.3.1 MIB Task Force private web page.

http://www.ieee802.org/3/be/private/

You will need the following username and password to access this page:

The username is: xxxxxxx
The password is: xxxxxxx

The password is case-sensitive. Please do not distribute this username
and password.

We will be reviewing this draft at our upcoming meeting Monday morning,
September 21, in Chicago.
Please remember that all of the draft is subject to change.

I again offer my thanks and appreciation to John Hawkins from Cienna for
his valuable help in producing this draft.

Howard Frazier
Broadcom Corporation
Chair, IEEE 802.3.1 MIB Task Force