Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [BP] IEEE P802.3ap Draft 0.7 now available for review



Arthur,

 

Yes, the text of the link is correct, but I somehow managed to have it point to the wrong place.  Thank you for posting the correction.

 

Thanks,

-Adam

 

 

-----Original Message-----
From: owner-stds-802-3-blade@LISTSERV.IEEE.ORG [mailto:owner-stds-802-3-blade@LISTSERV.IEEE.ORG] On Behalf Of Arthur Marris
Sent: Wednesday, January 05, 2005 4:03 AM
To: STDS-802-3-BLADE@LISTSERV.IEEE.ORG
Subject: Re: [BP] IEEE P802.3ap Draft 0.7 now available for review

 

Adam,

   The link you have below actually points to the 802.3an private area. I think you meant to use this link:

 

  http://www.ieee802.org/3/ap/private/index.html

 

Arthur.

 


From: owner-stds-802-3-blade@LISTSERV.IEEE.ORG [mailto:owner-stds-802-3-blade@LISTSERV.IEEE.ORG] On Behalf Of Healey, Adam B (Adam)
Sent: 05 January 2005 00:58
To: STDS-802-3-BLADE@LISTSERV.IEEE.ORG
Subject: [BP] IEEE P802.3ap Draft 0.7 now available for review

IEEE P802.3ap Task Force Members,

 

Per the direction set at the November plenary meeting, Draft 0.7 of IEEE P802.3ap has been generated and posted for review.  Even though the document is incomplete, this partial draft is being submitted for review with the following objectives:

 

·         Implement a change control mechanism for adopted baseline text.

·         Mark the progress of the Task Force.  Baselines for 1000BASE-KX, 10GBASE-KX4, and auto-negotiation have been adopted and by putting them in draft document form, these baselines may be reviewed in finer detail and appropriate refinements may be recommended.

·         Highlight areas that need to be addressed to achieve “technical completeness” and ensure that the new Backplane Ethernet physical layers fit properly into the IEEE 802.3 architecture.

·         Since many Task Force members are new to IEEE 802.3, this is an opportunity to become familiar with the document review, comment generation, and comment resolution processes and tools.  In that sense, this serves as a “practice run” for the Task Force members and the editorial team.

 

This first review period will be two weeks.  At the January interim, comments received during this period will be reviewed and resolved.  If a Task Force member plans to make a presentation for adoption into the next draft, then it is highly recommended that the Task Force member submit a comment with a reference to the presentation as part of the suggested remedy

 

Please note that our top priority for the January interim meeting will be work related to the completion of the baseline.  The definition of the 10GBASE-KR port type and the backplane channel specifications are of principal concern.  The first portion of the meeting will be dedicated to these topics, and the second portion will be dedicated to comment resolution (which includes changes to 1000BASE-KX, 10GBASE-KX4, and auto-negotiation).

 

 

COMMENT PERIOD OPEN:
Tuesday, 4 January 2005

COMMENT PERIOD CLOSE:
11:59 p.m. (Pacific Time), Tuesday, 18 January 2005

 

 

Thank you for you careful and thorough review of the document.

Adam Healey, Chair

Schelto van Doorn, Editor

 

 

INSTRUCTIONS FOR COMMENTING ON: IEEE P802.3ap/D0.7
Instructions for accessing the document and submitting comments follow.

HOW TO ACCESS THE DRAFT
The document is posted for your review for comment purposes only, and neither the document nor access information should be copied or redistributed to others in violation of IEEE-SA document copyrights. The document may be downloaded from:

http://ieee802.org/3/ap/private/index.html
Userid and password have been previously distributed.

The document is posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it is available for free downloading from Adobe at:

http://www.adobe.com/prodindex/acrobat/readstep.html.

HOW TO SUBMIT COMMENTS
Please send your comments to:

ahealey@agere.com; schelto.vandoorn@intel.com

and paste the following into the subject line:
P802.3ap/D0.7 Comments

If you have comments, you can access the comment generation tool at the following URL:
http://ieee802.org/3/ap/public/BP_Comment_Tool.zip

 

This is a Windows-based run-time database application. Save the compressed zip file to a directory where you wish to uncompress the file. Once you uncompress the file, do not move the directory or any files in the directory as this may prevent the executable program from running properly. Double-click on the executable file (EXE) to run the database application. If this is the first time you have used this comment generation tool, please read the instructions.

NOTE: Use of this tool is greatly preferred, as the output it generates is easy to import into our comment resolution database.

If you are unable to use the tool, please format your comments and submit them as described below.
Acceptable comment types:
E = Editorial
T = Technical
TR = Technical Required (a Technical comment that the commenter feels very strongly about)

To submit comments in text (ASCII) form, please use the form below. This will make it easier for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail. Enter your comment between "Comment:" and "CommentEnd:" and your suggested remedy to your comment between "SuggestedRemedy:" and "RemedyEnd:".

------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------
CommentID: (Leave Blank)
CommenterName:
CommenterEmail:
CommenterPhone:
CommenterCo:
Clause:
Subclause:
Page:
Line:
CommentType: (E, T, or TR)
Comment:
CommentEnd:
SuggestedRemedy:
RemedyEnd:
--------------------end comment template------------------