Re: [BP] Interference tolerance test channels

["Mellitz, Richard" <richard.mellitz@xxxxxxxxx>]

Hi Charles,
DC and low freq's went down way to much! Can you create a model with the
same losses at say 1GHz or so and 2 dB less at 5GHz? I thought that's
what we agreed.
... Rich

-----Original Message-----
From: Charles Moore [mailto:charles.moore@avagotech.com] 
Sent: Friday, January 13, 2006 8:42 PM
To: STDS-802-3-BLADE@listserv.ieee.org
Subject: [BP] Interference tolerance test channels

guys,

     I propose that we use the model ITTC_23.s4p for reduced attenuation
EIT modeling.  If it really will not work, ITTC_20.s4p is available as a
bail out channel.  If it looks too easy, let me know and i will step it 
up just
a tad.

     The numbers refer to the fitted attenuation at 5.15...GHz.

                                  charles

-- 
|--------------------------------------------------------------------|
|       Charles Moore 
|       Avago Technologies
|       Image Solutions Division
|       charles.moore@avagotech.com
|       (970) 288-4561
|--------------------------------------------------------------------|