Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_NGEPON] Cl 45 Table 45-177-PCS control 1 register bit definitions



I’m just double checking to make sure everone is happy with the result.

Table 45-177 is speed select while 180 is PCS type selection.  Seems to me they’re a bit redundant too but better to ask than to do it again and again.

Best Regards

Duane

 

From: Marek Hajduczenia [mailto:mxhajduczenia@xxxxxxxxx]
Sent: Wednesday, January 16, 2019 12:32 AM
To: Duane Remein <Duane.Remein@xxxxxxxxxx>; STDS-802-3-NGEPON@xxxxxxxxxxxxxxxxx
Subject: RE: [802.3_NGEPON] Cl 45 Table 45-177-PCS control 1 register bit definitions

 

… and what would be the reason for duplication (just asking, not immediately obvious) …

 

Thanks

 

Marek

 

From: Duane Remein <Duane.Remein@xxxxxxxxxx>
Sent: Tuesday, January 15, 2019 10:26 PM
To: STDS-802-3-NGEPON@xxxxxxxxxxxxxxxxx
Subject: [802.3_NGEPON] Cl 45 Table 45–177—PCS control 1 register bit definitions

 

Does anyone think we need to duplicate the speed settings in Table 45-177 that we talked about for PCS type settings in Table 45-180

(i.e., add 10/-, 25/0, long with 25/10 and 25/25 already proposed)?

 

Best Regards,

Duane

 

FutureWei Technologies Inc.

duane.remein@xxxxxxxxxx

Director, Access R&D

919 418 4741

Raleigh, NC

 


To unsubscribe from the STDS-802-3-NGEPON list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGEPON&A=1


To unsubscribe from the STDS-802-3-NGEPON list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGEPON&A=1