Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_10SPE] Presentations uploaded for 802.3cg 10SPE TF & 10BPE SG Ad Hoc – reminder for Wednesday, February 14, 2018 7:00 AM-9:00 AM PT

The presentations for the 14 February ad hoc have been uploaded to the website.

Thank you to our contributors.  In case you missed the call-in information, you will find it below.


Please review the patent and participation slides before the meeting


  • IEEE 802 Participation –

  • IEEE POST-PAR Patent Policy – Relevant to work under the 802.3cg 10SPE charter

  • IEEE PRE-PAR Patent Policy – Relevant to the 10Mb/s Backplane Ethernet Study Group



Peter & George



Peter Jones 

802.3cg 10SPE Task Force Ad Hoc Chair


802.3 10BPE Study Group Acting Ad Hoc Chair



George Zimmerman, Ph.D.

Chair, IEEE P802.3cg 10 Mb/s Single Twisted Pair Ethernet Task Force

President & Principal

CME Consulting, Inc.

Experts in Advanced PHYsical Communications




Call information is below:

Join WebEx meeting  
Meeting number (access code): 205 069 641
Meeting password: wbZx3W8e (92993983 from phones) 

Join from a video system or application
Dial 205069641@xxxxxxxxxxxxxxx 
You can also dial and enter your meeting number.  
From the Cisco internal network, dial *267* and the 9-digit meeting number. If you are the host, enter your PIN when prompted.  
Join by phone 
+1-408-525-6800 Call-in toll number (US/Canada) 
+1-866-432-9903 Call-in toll-free number (US/Canada) 
Global call-in numbers  |  Toll-free calling restrictions  
Can't join the meeting?
If you are a host,
go here to view host information.

IMPORTANT NOTICE: Please note that this WebEx service allows audio and other information sent during the session to be recorded, which may be discoverable in a legal matter. By joining this session, you automatically consent to such recordings. If you do not consent to being recorded, discuss your concerns with the host or do not join the session.




To unsubscribe from the STDS-802-3-10SPE list, click the following link: