Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_10SPE] registers


I was looking at draft 2.0 and have a question re. which control and status registers are to implemented for 10BASET1S.

The description of 1.2299 (PMA control) says that reset could be done by setting 1.2299.15 or 1.0.15.

There are similar references to other registers e.g. 12299.14 and 1.9.0.

Does such cross reference mean that both registers must be implemented ?


Also the draft does not reference any clause 22 (MIIM) registers.

So can I assume that these don’t need to be implemented.


Venkat  Iyer

512 427 0253


To unsubscribe from the STDS-802-3-10SPE list, click the following link: