Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_10SPE] AW: [802.3_10SPE] AW: [802.3_10SPE] Support for Don Pannell's proposal

The concern for TSN is related to shared media. Point-to-point Full Duplex Ethernet media should not be a problem, regardless of the speed. Just make sure you have the time-stamping hardware required by 802.1AS (gPTP).

- Craig

On Thursday, September 13, 2018, 3:06:25 PM GMT+2, Gottron, Jens <jens.gottron@xxxxxxxxxxx> wrote:



I am no expert for TSN but I see no reason, why 10Mbit “APL” will not support TSN, because it is based on the 10BASET1L PHY, which is 10Mbit Full Duplex.


Best regards,




With best regards,
Jens Gottron

Siemens AG
Process Industries and Drives Division
Technology and Innovations
Field Level Communication
Oestliche Rheinbrueckenstr. 50
76187 Karlsruhe, Germany
Tel.: +49 721 595-1876
Siemens Aktiengesellschaft: Chairman of the Supervisory Board: Jim Hagemann Snabe; Managing Board: Joe Kaeser, Chairman, President and Chief Executive Officer; Roland Busch, Lisa Davis, Klaus Helmrich, Janina Kugel, Cedrik Neike, Michael Sen, Ralf P. Thomas; Registered offices: Berlin and Munich, Germany; Commercial registries: Berlin Charlottenburg, HRB 12300, Munich, HRB 6684; WEEE-Reg.-No. DE 23691322



Von: Marius-Petru Stanica [mailto:mariuspetru.stanica@xxxxxxxxx]
Gesendet: Donnerstag, 13. September 2018 14:54
An: STDS-802-3-10SPE@xxxxxxxxxxxxxxxxx
Betreff: Re: [802.3_10SPE] AW: [802.3_10SPE] Support for Don Pannell's proposal


Hello all, 


I am coming from ABB, Drives. I am not sure how to interpret these emails. I would avoid saying that there is no wish to support TSN on 10 Mbps APL, but I see some doubts. 

I am also participating in the IEEE IEC 60802 Joint Project and in the 802.1 activities. 

I would suggest that we have a more comprehensive discussion before one takes such decisions. 


I would like to thank you all before hand. 


Best regards,



Fehler! Es wurde kein Dateiname angegeben.

Dr. Marius-Petru STANICA
Communications Profiles Digital Architect, Drives Products
ABB Automation Products GmbH
Wallstadterstraße 59
DE-68526 Ladenburg, Germany

Tel: +49 6203 71 2922
Mobil: +49 171 996 12 50
email: marius-petru.stanica@xxxxxxxxxx

To unsubscribe from the STDS-802-3-10SPE list, click the following link:

To unsubscribe from the STDS-802-3-10SPE list, click the following link:

To unsubscribe from the STDS-802-3-10SPE list, click the following link: