Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: [EFM] Preliminary: FEC MPN Test

    I will try to make the call at 1:00 pm EDT. A comment on Meir's diagram: it looks like the BER will be measured as the signal is attenuated. It would be better to measure the BER as the length of the line is increased at different temperatures. If time permits I will try to do this measurement next week. We can increase the line length in multiples of 5 km.
-----Original Message-----
From: []On Behalf Of larry rennie
Sent: Tuesday, October 15, 2002 8:45 PM
Subject: [EFM] Preliminary: FEC MPN Test

Attached is a  proposed test methodology from Meir Bartur of Zonu measure the distance improvement in MPN limited links achievable with a low line BER's (approx.  10E-4).  This low BER will be corrected by the proposed frame FEC scheme to 10E-12.

We will discuss this test on tomorrow's conference call.

Comments and suggestions are encouraged.