Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: AW: [EFM] PON Optics Telephone Conference, December 5th



Geoff
 
I have broadly similar views to yours, as expressed in my email just after the LA interim (which should be on the archive).
 
I particularly dislike the prospect of an access method other than null (as in p2p full duplex) or CSMA/CD being part of the Ethernet CSMA/CD standard. I don't have a problem with a full duplex symmetric DSL PHY so long as the payload is Ethernet frames and the MAC access method is null.
 
Sorry Gerry, I just do not approve of the gate function in EPON, however, I am not going to hinder progress by making formal negative comments at this stage. If enough 802.3 people support the final draft I will abstain on EPON issue.
 
Best regards
 
Bob
 
 
 -----Original Message-----
From: owner-stds-802-3-efm@majordomo.ieee.org [mailto:owner-stds-802-3-efm@majordomo.ieee.org]On Behalf Of Geoff Thompson
Sent: 16 December 2002 05:25
To: Roy Bynum
Cc: Jonathan Thatcher; stds-802-3-efm@ieee.org
Subject: RE: AW: [EFM] PON Optics Telephone Conference, December 5th

Roy-

At 11:37 AM 12/13/2002 -0600, Roy Bynum wrote:
Jonathan,

802.3ah is not a LAN product technology.

I have become resigned to that.

The inherent characteristics of Ethernet as people have gotten used to them may no longer be there.

This is the part that I have trouble with.
If this is the case then why are we doing the project?
If the only goal is to attach the Ethernet name to a "me too" spec in the access space then I, for one, will vote against the result.
When this work started it was for "Ethernet in the Last (First) Mile".
I take that very seriously. I expect it to be just that.
If it turns out to be "Something that doesn't look like Ethernet in the First Five Miles" then it will not have my support.

It may turn out that Ethernet does not perform any better than any other protocol.  It may not save any costs to the service providers in its implementation, except perhaps to the end customer.

Thank you,
Roy Bynum

Geoff


At 09:23 AM 12/13/2002 -0800, Jonathan Thatcher wrote:

Roy,

What does "How 802.3ah will perform relative to the "jitter" issue has yet to be seen.  It is most likely that the data stability that LAN people are used to will no longer be there" mean?

Does extending the 5km to 10km impact jitter / data stability?
Does adding OAM frames impact jitter / data stability?
Does support of bidirectional rather than dual fiber transceivers impact jitter / data stability?
Does EDSL solution impact jitter / data stability?

What, exactly, are you trying to say? That because of EFM, Ethernet is no longer Ethernet?

jonathan


| -----Original Message-----
| From: Roy Bynum [mailto:rabynum@xxxxxxxxxxxxxx]
| Sent: Friday, December 13, 2002 8:24 AM
| To: Mccammon, Kent G.; 'Richard Brand'
| Cc: Mccammon, Kent G.; stds-802-3-efm@ieee.org
| Subject: RE: AW: [EFM] PON Optics Telephone Conference, December 5th
|
|
|
| Kent,
|
| Until 802.3ah, Ethernet does not induce any jitter in the
| transmission of
| application data.  I spent over a year in the lab looking at
| this.  The
| 802.3 stack, up until now was a pure streaming environment
| without any
| store and forward queues.
|
| This may sound like a bit of heresy as I am the original host
| master for
| MCI.  The worst culprit in inducing jitter in the transmission of
| application data in today's environment is Internet Protocol.
|  This occurs
| across all vendor lines using IP stack code from multiple vendors.  I
| believe that it is because the IP stack is fairly "deep" and
| there are
| several locations in the stack where some form of "store and
| forward" is
| required.  (Even forward looking code does not solve this problem.)
|
| You can have your lab people verify this.  Testing applications in
| non-routing environments will change the level of jitter that
| introduced in
| the communications infrastructure.  This effect of streaming
| switching was
| one of the main reasons that the "legacy free service
| providers" were able
| to deliver packet voice that had better clarity and sound
| quality than the
| local RBOC.  Testing using a non-routing stack such as
| NetBEUI will change
| the amount of jitter that is introduced at the end systems
| supporting the
| applications.  Interactive video becomes very "tight" in a
| non-IP environment.
|
| How 802.3ah will perform relative to the "jitter" issue has yet to be
| seen.  It is most likely that the data stability that LAN
| people are used
| to will no longer be there.
|
| Thank you,
| Roy Bynum
|
|
|
| At 09:30 PM 12/8/2002 -0800, Mccammon, Kent G. wrote:
|
|
| >Richard,
| >Controlling jitter over an Ethernet network is a project
| that we support in
| >other forums than 802.3ah.  My comment and question was
| attempting to
| >gather more information in the debate over common PMD timing
| specifications.
| >If the Options A-D in the debate of PON timing have
| different possible
| >services enabled, I think that is a fair question to ask on
| this exploder.
| >I don't  support multiple Gigabit PON timing specifications
| each one for a
| >only subset of potential service applications.
| >Thanks,
| >-Kent
| >
| > > -----Original Message-----
| > > From: Richard Brand [mailto:rbrand@xxxxxxxxxxxxxxxxxx]
| > > Sent: Friday, December 06, 2002 12:34 PM
| > > To: Roy Bynum
| > > Cc: kmccammon@tri.sbc.com; stds-802-3-efm@ieee.org
| > > Subject: Re: AW: [EFM] PON Optics Telephone Conference,
| December 5th
| > >
| > >
| > > Roy:
| > > So here we go.  I agree with everything you state except that
| > > Kent did not ask about "Leased Circuit Private Line services
| > > " or "Ethernet Private Line" but about T1 services over a
| > > draft 802.3 P2MP network. In addition Ethernet private line
| > > or leased line services are just as much out of scope for
| > > 802.3 as is TDM based T1 services. That's why we have taken
| > > on that work in the MEF with a close liaison to the ITU work
| > > to which you make reference.  That also gets into
| > > encapsulation, but that is surely out of scope for .3.
| > > Therefore, I am correct in saying that your message did not
| > > answer his question.  I do believe Arial's note makes an
| > > attempt to address the efficiency question, but I
| > > believe that the potential for added jitter is real.   It is
| > > however, out of scope
| > > for .3.  Kent, any comments?
| > > Regards,
| > > Richard
| > >
| > >
| > > Roy Bynum wrote:
| > >
| > > > Richard,
| > > >
| > > > You are incorrect. 802.3 in and of itself can NOT be used
| > > to provide
| > > > Leased Circuit Private Line services. I am the author of
| > > the term and
| > > > definition of "Ethernet Private Line" services. Ethernet
| > > Private Line
| > > > is based on SONET/SDH, not 802.3
| > > >
| > > > ITU standards for leased circuit private line services
| specifically
| > > > states that the customer of the leased circuit has
| exclusive use of
| > > > the circuit facility. This is in contrast to "packet"
| > > services that do
| > > > emulation via a "virtual" circuit. Since 802.3ah PON does
| > > not provides
| > > > virtual circuit emulation via the frame "header", called a
| > > "preamble"
| > > > by 802.3 and not any type of physical or time based facilities
| > > > segregation, it falls under the category of a
| > > "packet/frame" service
| > > > technology, not a leased circuit service technology.
| > > >
| > > > The existing ITU standards already provides for
| permanent virtual
| > > > circuit emulation at fixed bandwidths over packet/cell
| > > based services.
| > > > These can be at T1 or any other fixed bandwidth.  The
| ITU standards
| > > > makes a specific distinction between the "leased circuit"
| > > services and
| > > > the emulated circuit services over packet/cell/frame transport
| > > > protocols.
| > > >
| > > > I didn't write the ITU standards. I just spent the last
| year that I
| > > > was at Worldcom researching the specifics of defined
| standards for
| > > > different types of data communications services.
| > > >
| > > > 802.3 in and of itself does not provide leased circuit
| private line
| > > > services. The fact that a single customer using 802.3 can be
| > > > provisioned as the only customer on a "dark" fiber,
| makes the dark
| > > > fiber, a leased circuit private line service, not the
| 802.3. This
| > > > format would also hold for 802.3ah copper facilities that
| > > are used by
| > > > a single customer.
| > > >
| > > > The service "Ethernet Private Line" is not based on an
| > > 802.3 standard,
| > > > other than it provides a "mapping" for Ethernet frames. The
| > > ITU x.86
| > > > "Ethernet over LAPS" provides for "mapping" of Ethernet
| frames into
| > > > SONET/SDH by replacing the IFG/Preamble with LAPS, a HDLC
| > > derivative
| > > > and then using TDM nature of SONET/SDH to provision the
| > > service as a
| > > > standard leased circuit facility.  This would also hold
| for g.GFP.
| > > >
| > > > Thank you,
| > > > Roy Bynum
| > > >
| > > > At 02:40 PM 12/5/2002 -0800, Richard Brand wrote:
| > > > >Thomas:
| > > > >I would offer that Roy's note does not answer question 1
| > > and I have
| > > > >sent a note to Roy to detail.  As Kent is aware, there is
| > > an ongoing
| > > > >project in the MEF right now to specify circuit
| services (read TDM
| > > > >including T1) over Ethernet including 802.3 networks.
| > > > >The timing issue could be critical to some implementations
| > > and is one of the
| > > > >reasons I voted "no" in Kauai.  Vipal, do you want to
| take it on?
| > > > >Regards,
| > > > >Richard Brand
| > > > >
| > > > >
| > > > >
| > > > >Thomas.Murphy@xxxxxxxxxxxx wrote:
| > > > >
| > > > > > Hi Kent,
| > > > > >
| > > > > > Thanks for your input on this topic. I believe that
| question 1)
| > > > > > has already been addressed by Roy Bynum; there are
| > > others who are
| > > > > > in a better position to answer this than me.
| > > > > >
| > > > > > Regarding testing I see two different levels/types
| of testing.
| > > > > > Firstly there is module testing where different
| response times
| > > > > > will not present a problem (the response time is
| > > probably one of
| > > > > > the parameters that would be determined). Beyond
| this there is
| > > > > > then system/interoperability testing. When testing with
| > > > > 'non-intelligent'
| > > > > > equipment, the guardband between bursts would be set to the
| > > > > > Upper-Bound values agreed upon. By guardband I mean the
| > > time delay
| > > > > > between the Tx_On signal and the time when the Rx
| > > starts examining
| > > > > > bit to determine the BER. With an intelligent system, i.e.
| > > > > > protocol implementation with negotiated parameters,
| > > > > > interoperability is not a problem as the optimal
| > > guardband is calculated.
| > > > > >
| > > > > > The above tests determine if one Tx communicates
| optically with
| > > > > > the
| > > > > expected
| > > > > > BER
| > > > > > with another Rx. Setting the guardband equal to the
| upper limit
| > > > > > determines that the timing requirements of the combined
| > > link are
| > > > > > met. Direct module testing delivers the individual Rx and Tx
| > > > > > times.  Hence, I don't see a problem with testing
| > > depending on the
| > > > > > option choice for the timing parameters.
| > > > > >
| > > > > > Regards
| > > > > >
| > > > > > Tom
| > > > > >
| > > > > > -----Ursprüngliche Nachricht-----
| > > > > > Von: Mccammon, Kent G. [mailto:kmccammon@xxxxxxxxxxx]
| > > Gesendet am:
| > > > > > Donnerstag, 5. Dezember 2002 02:45
| > > > > > An: Murphy Thomas (COM FO D O); stds-802-3-efm@ieee.org;
| > > > > > Vipul_Bhatt@xxxxxxxx; wdiab@xxxxxxxxx
| > > > > > Betreff: RE: [EFM] PON Optics Telephone Conference,
| December 5th
| > > > > >
| > > > > > Tom,
| > > > > > Since I have a conflict with the call tomorrow and I am
| > > interested
| > > > > > in this decision, here are some questions.
| > > > > >
| > > > > > 1)Do any of the options for PON timing impact the
| delivery of
| > > > > > services such as toll quality voice, a T1, or multicast
| > > video? We
| > > > > > had this concern previously and the answer previously
| > > was claimed
| > > > > > to be only an efficiency hit for loose timing. Are
| the modeling
| > > > > > assumptions to compare efficiency valid for TDM
| services or is
| > > > > > that not a consideration in this debate to date? 2)The
| > > negotiation
| > > > > > of timing parameters rather than a tight
| specification have any
| > > > > > impact on future interoperability testing?  If we ever
| > > decide to
| > > > > > test interoperability of EPON OLT and ONT, can a lab testing
| > > > > > system be reasonably built to test compliance to a
| > > specification
| > > > > > for OLT/ONT timing for the various options under
| debate? 3)Do
| > > > > > operating temperature swings have an impact on timing
| > > options. Is
| > > > > their
| > > > > > reason to add extra margin or extra negotiation
| time of timing
| > > > > > parameters due to temperature variations? What about
| > > cold start in
| > > > > > cold temperatures, that was an issue for power
| levels, does it
| > > > > > also impact the electronics of the PMD?
| > > > > >
| > > > > > Comment: As an advocate of PON technologies I echo
| my earlier
| > > > > > comments
| > > > > about
| > > > > > striving for common PON PMD to get the volume
| started in today's
| > > > > economy.  I
| > > > > > am optimistic a compromise can be found in January. Thanks,
| > > > > > -Kent
| > > > > >
| > > > > > > -----Original Message-----
| > > > > > > From: Thomas.Murphy@xxxxxxxxxxxx
| > > > > > > [mailto:Thomas.Murphy@xxxxxxxxxxxx]
| > > > > > > Sent: Wednesday, December 04, 2002 10:12 AM
| > > > > > > To: stds-802-3-efm@ieee.org; Vipul_Bhatt@xxxxxxxx;
| > > wdiab@xxxxxxxxx
| > > > > > > Subject: [EFM] PON Optics Telephone Conference,
| December 5th
| > > > > > >
| > > > > > >
| > > > > > > Hello Again,
| > > > > > >
| > > > > > > Attacted two possible approaches to this discussion
| > > forming two
| > > > > > > decision trees. Glen and I worked on these I I
| did not have a
| > > > > > > chance to co-ordinate with him and refine to one
| slide.  The
| > > > > > > first slide is mine and I would like to start here as
| > > it allows
| > > > > > > us to generate values without having to make
| > > decisions. When the
| > > > > > > values are agreed upon, we can work towards the
| decision and
| > > > > > > perhaps this is simpler with the values we have.
| > > > > > >
| > > > > > > If this does not work, we can try the seconf slide, Glen's
| > > > > > > approach, which is a more top-down attack.
| > > > > > >
| > > > > > > Talk to you tomorrow
| > > > > > >
| > > > > > > Tom
| > > > > > >
| > > > > > >  <<PON Timing Decision Tree.ppt>>
| > > > > > >
| > > > > > > Hello All,
| > > > > > >
| > > > > > > Items to Be Covered
| > > > > > >
| > > > > > > 1)  Determine the exact meaning of the terms "Fixed
| > > Value" and
| > > > > > > 'Upper Bound" in terms
| > > > > > >     of their use for PMD timing parameters.
| > > > > > >
| > > > > > > 2)  Try assign placeholder values for all of the options
| > > > > > >
| > > > > > > 3)  Are these values fixed or bounded for the
| > > different options.
| > > > > > >
| > > > > > > 4)  Other items
| > > > > > >
| > > > > > > Regards
| > > > > > >
| > > > > > > Tom
| > > > > > >