Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: [EFM] IEEE 802.3ah MIB?

Up to this point we have two volunteers for participating in a possible 802.3ah MIB work - one for copper, and one for EPON. We have also noted the interest expressed by the Chair of the IEEE 802.3ah - Howard Frazier. This is promising, but still, IMO,  under the threshold of interest required for starting new work in the IETF Ethernet Interfaces and Hub MIB WG.

If you and/or your sponsoring company are interested in participating in this work and/or implementing a future standard EFM MIB (whatever flavor of EFM) in your products - please send an e-mail to 



Dan Romascanu,
Chair, IETF Ethernet Interfaces and Hub MIB WG

> -----Original Message-----
> From: Bemmel, Vincent []
> Sent: 30 June, 2003 5:39 AM
> To: Romascanu, Dan (Dan); ''
> Subject: RE: [EFM] IEEE 802.3ah MIB?
> Dan,
> I would like to co-edit the EPON MIB. This will include 
> seperate MIBs for
> the OLT and the ONU with associated services.
> I hope we can show enough interest to get this work started asap.
> Regards,
> Vincent Bemmel
> Alloptic
> > Dan,
> >
> >I'm interested to become a co-editor of the 802.3ah MIB.
> >My company specializes in Aggregated Copper EFM systems
> >(currently long reach - 2BaseTL).
> >
> >Regards,
> >-Edward Beili
> > Senior System Engineer
> > Actelis Networks
> >