RE: [EFM] IEEE 802.3ah MIB?
I am interesting in participating in this effort.
I am implementing 802.3ah OAM in our product. The need for a MIB to control
the OAM functionality seems apparent. And it would be great if we can create
a standard MIB.
From: Romascanu, Dan (Dan) [mailto:firstname.lastname@example.org]
Sent: Monday, June 30, 2003 10:40 AM
To: Bemmel, Vincent; email@example.com
Subject: RE: [EFM] IEEE 802.3ah MIB?
Up to this point we have two volunteers for participating in a possible
802.3ah MIB work - one for copper, and one for EPON. We have also noted the
interest expressed by the Chair of the IEEE 802.3ah - Howard Frazier. This
is promising, but still, IMO, under the threshold of interest required for
starting new work in the IETF Ethernet Interfaces and Hub MIB WG.
If you and/or your sponsoring company are interested in participating in
this work and/or implementing a future standard EFM MIB (whatever flavor of
EFM) in your products - please send an e-mail to firstname.lastname@example.org.
Chair, IETF Ethernet Interfaces and Hub MIB WG
> -----Original Message-----
> From: Bemmel, Vincent [mailto:vincent.bemmel@Alloptic.com]
> Sent: 30 June, 2003 5:39 AM
> To: Romascanu, Dan (Dan); 'email@example.com'
> Subject: RE: [EFM] IEEE 802.3ah MIB?
> I would like to co-edit the EPON MIB. This will include
> seperate MIBs for
> the OLT and the ONU with associated services.
> I hope we can show enough interest to get this work started asap.
> Vincent Bemmel
> > Dan,
> >I'm interested to become a co-editor of the 802.3ah MIB.
> >My company specializes in Aggregated Copper EFM systems
> >(currently long reach - 2BaseTL).
> >-Edward Beili
> > Senior System Engineer
> > Actelis Networks