Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[EFM] FW: [Hubmib] I-D ACTION:draft-beili-hubmib-efm-cu-mib-00.txt

Subject: FW: [Hubmib] I-D ACTION:draft-beili-hubmib-efm-cu-mib-00.txt
Date: Thu, 23 Oct 2003 10:33:26 +0200
From: "Romascanu, Dan (Dan)" <>
To: <>

From: []
Sent: 23 October, 2003 12:38 AM
To: IETF-Announce;
Subject: [Hubmib] I-D ACTION:draft-beili-hubmib-efm-cu-mib-00.txt

A New Internet-Draft is available from the on-line Internet-Drafts

	Title		: Ethernet in the First Mile Copper (EFMCu) Interfaces MIB
	Author(s)	: E. Beili
	Filename	: draft-beili-hubmib-efm-cu-mib-00.txt
	Pages		: 24
	Date		: 2003-10-22

This document defines a portion of the Management Information Base
(MIB) for use with network management protocols in TCP/IP based
Internets. This document proposes an extension to the Ethernet-like
Interfaces MIB and MAU MIB with a set of objects for managing an
Ethernet in the First Mile Copper (EFMCu) interfaces 10PassTS and
2BaseTL defined in IEEE 802.3ah.

A URL for this Internet-Draft is:

To un$ub$cribe yourself from the IETF Announcement list, send a message to
ietf-announce-request with the word un$ub$cribe in the body of the

Internet-Drafts are also available by anonymous FTP. Login with the
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-beili-hubmib-efm-cu-mib-00.txt".

A list of Internet-Drafts directories can be found in

Internet-Drafts can also be obtained by e-mail.

Send a message to:
In the body type:
	"FILE /internet-drafts/draft-beili-hubmib-efm-cu-mib-00.txt".

The mail server at can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.