Re: [EFM] The value of revision field when changing OAM mode
That's what I thought (incrementing). I don't think the standard is explicit about this.
This can be interpreted both ways (zeroing or incrementing) because changing mode
trigger the BEGIN event in figure 57-5. Some implementations may use that to re-initialize
From: John Messenger [mailto:jmessenger@ADVAOPTICAL.COM]
Sent: Friday, June 11, 2004 5:29 PM
Subject: Re: [EFM] The value of revision field when changing OAM mode
I would increment it. Did you read something in the standard that made you
think of resetting it to zero?
John Messenger (JMessenger@advaoptical.com)
R&D Manager, Software
ADVA Optical Networking Ltd.
From: Stephen Suryaputra [mailto:ssuryaputra@HATTERASNETWORKS.COM]
Sent: 11 June 2004 21:48
Subject: [EFM] The value of revision field when changing OAM mode
I have a question on the value of revision field in the local information
when the DTE is changing mode from active to passive. The issue is when a
come up with local_oam_mode=ACTIVE and then later is configured to
At that time should the revision field resets back to zero or can it be